|Model:||Car laser fog l|
|Origin:||Made In China|
|Category:||Consumer Electronics & Lighting / Lighting / Car Light & Auto Mirror|
|Label:||Led Fog Light , Led Fog Light Bulb , 200mw Laser Led Fog|
|Min. Order:||10 pc|
Type: Fog Light
Lamp Type: LED
Car Make: cars, truck, motorcycles
Place of Origin: China (Mainland)
Brand Name: RAYCH
Model Number: Car laser fog lamp
Warranty: 1 Years
Laser Wavelength: 650nm(red color)
Laser Power: 200mw
Laser Safety Grade: Class IIIB
Operating Temperature: -30 °C~60 °C
Working Voltage: 8V-36V
Waterproof Grade: IPX4
The Maximum Adjustable Angle: ±90 °C from top to bottom
Bearing Temperature of 3M Glue: -40 °C~120 °C
Packaging & Delivery
|Color gift box|
|Delivery Detail:||3-5 days|
Newest arrival Raych Car Laser Warning light, Rainy/Snowy/Foggy day warning light, laser fog light
Introduction of Use
Fog is one of the main causes of traffic accidents. With the increasingly environmental pollution and more and more worsening haze area, the duration of fog is longer and longer. The visibility range in rainy days is too weak and it is easily to cause traffic accidents.
The latest developed laser fog lights works through the installation of a red laser transmitter in the rear of the vehicle to form a laser beam through air to the ground in the rain and fog weather. Compared with the traditional fog lights, it is easier to be found and the penetrating power of it is stronger. Besides, it can remind the vehicles behind to maintain a safe distance. The laser beam emits downward with a certain inclination angle to ensure that no direct exposure to the eyes. Open the light in the sunny weather, only can see a red line projected on the ground, no need to worry about it will shielding the vehicle license plate.
|Automobile Laser Fog Light|
|Laser Wavelength||650nm(red color)|
|Laser Safety Grade||Class IIIB|
|Mounting Placement||Above the center of license plate|
|Operating Temperature||-30 °C~60 °C|
|Bearing Temperature of 3M Glue||-40 °C~120 °C|
|The Maximum Adjustable Angle||±90 °C from top to bottom|
|Line Connection||Parallel connected it with the circuits of the license plate lamp, rear fog lights, brake lights or the hazard warning lights.|
Introduction of Installation
1. Rive the double-sided adhesive, adhere the laser fog light above the certer of the rear license plate.
2. Connect the circuits and open the fog light, adjust the emitting angle to make the beam project to the ground.
3. Tighen screws.
It will be more effectively to warn the vehicles behind to avoid traffic accidents with too close distance when driving in the rain, fog or sandstorm weather. It also provides more eye-catching position caution and steering indication of the vehicles when driving at night. Moreover, the automobile laser fog light is also helpful to new drivers for alignment when driving back into garage.
1.Do not illuminate eyes when installed.
2.Do not shield the license plate when installed.
3.The product is used for cars, trucks and motorcycles with voltage of 8V-36V