| Model: | LD-MFC |
|---|---|
| Brand: | Landau |
| Origin: | Made In China |
| Category: | Industrial Supplies / Other Industrial Supplies |
| Label: | multi finger caliper , MFC , Multi imaging Tools |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:02 Feb, 2015 |
1.Brief Introduction
The primary function is to detect the deformation, bending, fracture, perforation and inside corrosion of tubing or casing with multi caliper fingers.
Each caliper finger is connected to an independent non-contact displacement transducer that features small sizes, long service life, and high accuracy of measurement.
The tool can connect to LANDAU Cased-hole Logging System or Warrior Logging System, made by Scientific Data Systems (SDS) Inc., to constitute a casing imaging logging system. All logging data, including multi-channels of borehole diameter, cartridge temperature, and cable head voltage are acquired by the tool and sent to the surface system via telemetry circuit and mono-cable. After data is processed by the computer software, the diagram of borehole inner diameter and a 3-D image of pipe are created to intuitively demonstrate the condition in detail of downhole tubing or casing.
2.Specifications
|
Type |
MFC24 |
MFC40 |
MFC60 |
|
OD |
43mm |
70mm |
100mm |
|
Total Length |
1422mm |
1360mm |
1440mm |
|
Working Temperature |
-20°C~175°C(-4°F~347°F)/ 2 hours |
||
|
Working Pressure |
≤100MPa(14,503 psi) |
||
|
Working Voltage |
90V±10% |
||
|
Working Current |
30±5mA |
||
|
Caliper Measuring Point |
638.5mm(25.14″) (from bottom of the tool) |
||
|
Max. Logging Speed |
600 m/h ( 32 ft/min ) |
||
