Home > Products > Transportation > Car Accessories > Auto Maintenance

Product Name : Launch CNC-801A Injector Cleaner & Tester

Introduction: 

Launch CNC-801A Injector Cleaner & Tester developed with the technology of ultrasonic cleaning and fuel pressure control, CNC-801A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.

Features:

 * Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove                         the carbon deposits on the injector completely. 

 * Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector,                             and to monitor the spraying status of each injector with the help of backlight.                                               This test is also for reverse flush.

 * Leakage test: To test the sealing and dribbling conditions of injectors under system pressure; 

 * Auto. test: To test injectors by simulating different working conditions. 

 * On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate                       cleaning on the injectors on vehicle.
   
    

Specification

    1. Power supply:□AC220V±10%/50Hz~60Hz □AC110V±10%/ 50Hz~60 Hz

    2. Input power: 280W; 

    3. Ultrasonic cleaning power: 100W; 

    4. Simulated RPM range: 10～9990rpm; step: 10rpm; 

    5. Count range: 1～9999 times; 

    6. Pulse width: 0.5～25ms; step 0.1 ms;

    7.  Fuel tank capacity: 4700ml; 

    8.Dimensions: 550mm×530mm×1400 mm;

    9.Weight: About 80kg.

Spare Parts

After Sale Service : 

Three years product quality warranty 

1) Free update during three years; 

2) Free repair and maintenance service in one year;

3) Free technical support by internet or via phone.

If you have any interests in it, pls contact us directly.