Home > Products > Electronics & Electricity > Other Electrical & Electronic

Output from 30-60W per meter 
Color: Brown 
Insulation options: XLPE or Teflon 
Braiding: Tinned copper or Al-mg alloy wire 
Outjacket: PE or Teflon 

Self regulating heating cable provide the most versatility in heat 
Trace design and applications. Constructed of a Semi-conductive 
Heater matrix extruded between parallel buswires, a self regulating 
Cable adjusts its output to independently respond to ambient 
Temperatures all along its length. As temperatures increase, the 
Heater's resistance increase which lower the output wattage. 
Conversely, as the temperature decrease, the resistance decreases 
And the cable produces more heat. So it is no need thermostat 
In some applications. It will never overheat or burnout even when 
Wrapped by itself(overlapped). It can be cut to any length. So it is a 
Convenient, easy use and energy saving product.

Why us?

Quality comparisons:

1. Why use Thick tinned/nickel-plated copper, often over 1.3mm2 (sectional area)?

The thin one will cause overheat of the cable, and will make the cable under a short using life, even can make a serious results. 

2. Why Initial starting current is so important for the self regulating heating cable?

It is an essential factor for a good quality cable. If the IS currency is big, it will shorten the using length of the cable, and it will make the cable under a short using life,even can make a serious results. 

3. Why using Cross linking technology and how to know who use them.

Using this technology will make the cable at a stable electricity performance and the cable will memorize this characteristics, so the cable will have a long using life.

When we using this cable, we can find the insulation layer will be tough and not easily to move from the PTC layer.

Outlook comparison: