Home > Products > Construction & Decoration > Prefabricated Building

This product USES the international advanced technology development of new environmental protection material, nanometer polymer concrete pump pipe tube agent, used to replace the traditional concrete pumping before embellish tube cement mortar. Its main raw materials imported polymer nanoparticles, at room temperature, can quickly dissolved in water, once through the pump pipe, nanoscale lubricating film formed on the inner wall of the pump pipe, allowing sufficient lubrication pump pipe inner wall surface, reduce the concrete pumping through pipe friction resistance, ensure the pump to send smoothly.

Product performance:

Use this product when pumping concrete do not need to wet cement mortar pump pipe, can prevent lip tube cement mortar pouring into concrete structure caused by quality defects, at the same time for reinforcement corrosion effect.

This product use convenient, environmental protection, non-toxic harmless for people and for the environment; Save cement, river sand and other resources, reduce transportation vehicles, improve equipment utilization rate, reduce the production cost of ready-mixed concrete enterprise, improve the quality of concrete product. Use this product to save time, save worry, environmental protection. Is a revolution of the concrete pumping process.

Method of use:

1, before the pump check: 1) check the pump, truck-mounted concrete pump hopper and conveying pump pipe leak slurry; Owing the front hose should be natural prolapse; 2) pump pipe should be no residue and water; 3) pay special attention to start pumping, be sure to make tube front hose is in a state of natural prolapse, get through later, hose can move laterally.

2, before using this product into a certain amount of water, then mix well to make it completely dissolved.

3, stir well after placing it 3-5 minutes, after waiting for solution to thicken lubrication, can be used.

4, owing to embellish agent aqueous solution in a concrete pump car inside the bucket, then start pumping this product solution; After being with a small amount of solution in the hopper, began to concrete pump concrete tank slowly feeding hopper, constant pump at the same time; After get through normal feeding pump. Should let pump pipe lubricant solution when pumping through pump pipe, push pumping concrete in behind.

5, the pump pipe discharge pump pipe lubricant aqueous solution, please outside the template.

6, use pump pumping concrete, to prevent pump pipe inside leave a residue, should first pumping 100 kilograms of water clean tube, such as the water in the hopper and pipeline after empty again according to the above 2-5 steps pumping. At the same time, due to the level of the pump tube usually longer, this needs according to the characteristics of the tube to operate: 1) if the floor above the horizontal tube is shorter, only 10 meters, please raise a metre discharge hose to you; 2) if the floors above the horizontal tube is longer then the horizontal tube above must be paved with a 10-20 degrees Angle, the slope formed a line up, make the pump pipe inner surface can be stick to embellish tube, make it smooth and play the role of smaller resistance. 3) another way is to use wash pipe sponge balls in play embellish agent into the diameter tube, before make the sponge ball in front of the smooth tube agent, to fill the whole pipeline with smooth tube agent, making the entire inner surface of pipe can stick to embellish agent. Have very good embellish tube effect thereby.

Packing and storage:

This product packed in plastic bags, each bag is 300 grams. Please put this product in a cool, ventilated, dry place, avoid sunlight.

Production date: see pincer-like device. Shelf life: two years.

The analysis of economic benefit:

Use this product once, mortar, transport vehicles can save production costs nearly 200 yuan, according to the annual output of 300000 cubic meters, an average of 100 cubic meters of opening time, must be 3000 times, can save 3000 x 200 = 600000 yuan!

Note:

1, delivery pump pipe residuum.

2, delivery pump pipe joint should be sealed without leakage.

3 when the first car, pumping concrete, concrete slump should improve 2-3 cm.

4, when used in summer should decrease the temperature of pump pipe pump water first.

5, the pump pipe discharge pump aid should not be poured into the concrete structure.

6, to embellish agent solution as much flow pump pipe: 1) first put a small amount of concrete in the hopper and the nozzle is flat, then stir in embellish agent solution; 2) start with a

Slow speed with concrete tube embellish agent solution put into tube after open pump work, tube pump pipe embellish agent aqueous solution by pump pipe first, push pumping concrete in behind.

7, pumping concrete before must ensure that there is no water in the pump pipe, so as not to dilute embellish agent solution.

8, this product into the eyes carelessly clean with clear water immediately, please put in children is not easy to take place.