Home > Products > Security & Protection > Access Control System

Parameters:

Chip Type: NTAG203 

Storage capacity: 144byte

Operating Frequency: 13.56 MHz

Baud rate: 106 Kboud

Reading distance: 0-5 cm (depending on the RFID reader performance)

Reading and writing time: 1 to 2 ms

Working temperature: -20 to 55 degree, humidity of 90%

Erase times : > 100000 times

Data storage :> 10 years

Warranty: 100% test before sending out

Production standards: ISO 14443A

Instruction:

1, same with  Sony's Xepria, Samsung TecTile  function.

 2, label is blank with no data, you can download some free software, such as "NFC Task Launcher" edit the label, the label can be repeatedly erased 100000 times, rest assured to play!
 3, Android NFC phone system can go to Google Play NFC reader to download the appropriate software, Android Market where there are a lot of free software.

How to encode the Tag:

Note:

Please pre-install the "NFC Tasks" and "NFC Tools" on your cell phone before use. You can download them from Google Play or below address:

  
A, "NFC Tasks": http:// nfc-app.b0.upaiyun.com//nfc-app/NFCTasks.apk

 B, "NFC Tools": http:// nfc-app.b0.upaiyun.com//nfc-app/NFCTools.apk

How to use NFC in your life:

When at home: 

The NFC label on the door, set it to accomplish some things, such as: Open Wi-Fi, dim light, turn off Bluetooth or automatic synchronization. With NFC Task Launch application, you can set the tag "switch", then when you leave the house you can touch the tab again to change these settings (such as turning off Wi-Fi) 

While driving: 

NFC label on the dashboard or near the middle of the control panel, set it to turn off Wi-Fi, turn up the volume or turn on Bluetooth (phone). If your cell phone and car speakers are connected, you can set the tag to open applications like Pandora. 

Getting ready for work:

The NFC tag attached to the surface of the table, set it to dim the light, turn off the sound, turn on Wi-Fi or automatic synchronization. According to their own preferences, you can also set it to enter the music application, open daily matters, even landing Foursquare. If you set the label switch, then you can touch it off when you leave the previous activity again. 

On the nightstand:

You can also put labels on the nightstand and set it to turn off the sound, turn on the alarm, turn off automatic synchronization, turn off lights and lowering reminder light. 

Wi-Fi connection:

If you want the guests at home (or office) using Wi-Fi without the need to give them a password, you may use the tag to connect the Wifi. This free Android application allows you to set an NFC tag, the phone or mobile device by touching an NFC device to connect Wi-Fi. 

Automatically opens the timer:

Have you tried to open a washing machine, a left forgotten? Next to the washing machine or dryer to start the timer label affixed to it. 

Quickly open a specific Evernote notes:

Touchanote is a free application, award-winning software developer in the notes contest. It can be directly connected to a particular set of tags to notes. Their demonstration included the Settings tab to open the to-do items or open the product label affixed to the side to open the product manual. 

NFC key chain:

NFC tags affixed to the existing key chain, or an NFC-line custom key chain, set it to accomplish what you often do things that can be transferred into the phone mode or turn on the hot favorite songs. 

Still have a lot of interesting things waiting for you to find out.