Home > Products > Sports & Recreation > Entertainment > Pet Supplies

Vibration Dog Training Collar (P-154)

Main Features :

Vibration Dog Training Collar

Without electronic shock

150 meters working range

Receiver: AAA 1.5V battery

Transmitter : 23A 12V battery

Product detail:

Remote dog training collar includes the remote controller and collar receiver. The collar is worn on the dogs neck and controlled by the remote controller of master. The collar can produce the high frequency vibration, discharge shock, lighting and buzzing etc. It is a good helper to train the dogs performing your order.

Features:

1. 2 levels of vibrations and whistle.
2. 150 meters working range.
3.  Receiver: 1.5V, AAA batteries.
4. Transmitter: 12V, 23A battery.
5.  Ideal for call or training pets.
6. Use vibration instead of static stimulation.

Function

1. Confirm that batteries have been installed in the remote controller and the receiver. 

2. Checking the remote controller: Press the buttons on the remote controller respectively. The indicator light will be on. If the indicator light doesn’t work or gives dim light, change the batteries.

3. Checking the receiver: The vibration induction switch being installed, when the receiver is shaken, the power will be connected automatically and the receiver will be on standby. While the receiver keeps still for over 5 minutes, the power will be cut automatically for saving energy.

4. Connect the collar with the receiver. Adjust the length of the collar so as it fits the neck of the pet. The proper tightness should be that you can put a finger in.

5. Respectively press the high frequency/low frequency vibration buttons on the remote controller. The receiver will make high frequency/low frequency vibration.

6. Press the Sound button on the remote controller and the receiver will make the sound of B-B. You can train the pet to take your orders by different tempos. Every order must have a fixed tempo. An insisting training will bring you a wonderful effect.  For example, “three B-B” sounds mean “coming back”.

7. Press the Light button on the remote controller and the receiver will give flashes of light, facilitating looking for your dog at night.

Notes:

1. Please read the instruction carefully at first.

2. Don’t make it too tight while the discharging point of the receiver can touch the neck of the pet.

3. Obstacles will affect the valid distance of remote controlling, If there are interference signals or signal screening around, the actual remote control distance may be shorten.

4. If you don’t use this product, take the collar and receiver off the dog and place them in a place without vibration.

5. If you don’t use the collar for a long time, take out the batteries.

Packing Content:

Packing list :                

CTN: 44*34*34cm             

Qty/CTN: 56pcs/ctn

N.W: 12kg

G.W: 13kg