Home > Products > Electronics & Electricity > Switch > Other Switches

We mentioned

Connecting rod ball float liquid level switch is a safe, reliable, easy to use, simple structure of the liquid level controller. A product can achieve multi-point control. Its characteristic is long life, high speed has stronger ability to resist impact load.

2 application

Wastewater/water purification treatment, shipbuilding, electrical equipment, oil, chemical, food, electronic, dyeing, chemical, rubber and plastics, hydraulic machinery, chemical, pharmaceutical and other industries.

3, point

MY - MA connecting rod ball float liquid level switch

For more control. Control switch position can customized according to user needs.

The use of magnetic reed switch does not need to supply the power and contact life can reach 2 million times.

All switch wire at the same junction box, external construction wiring cost is low.

Comparing multiple control points and other forms of liquid level switch, RF type is lowest.

Terminal block protection grade are over IP - 65.

With PP, SUS316 metal material, so no matter acid alkali, solvent, or all kinds of fuel, is suitable products can be used.

Magnetic reed switch and wire completely and liquid separation, therefore in high temperature and high pressure equipment can be safe to use.

Connecting rod type ball float liquid level switch suits, suitable for high temperature and high pressure situations

60 va reed switch, dry contacts through float installation location choice normally open or normally closed

316 SS floating ball, catheter and installation interface, suitable for bad environment

Take easy electrical on the base of the regulation that can rotate in American standard (NEMA 4 x) polypropylene shell

Customizable catheter length and switch set point size

Working principle of the four editors

Connecting rod ball float liquid level switch used magnetic functioning, no mechanical fittings, operation is simple and reliable. When the measured medium float float float switch, float drives the moving subjects, at the same time float at the other end of the magnet will control switch on the action bar magnets.

In airtight metal or plastic tube, the magnetic reed switch set one or more points, then through one or more of the pipes, hollow and internal floating ball with ring magnet, and use the retaining ring and control floating ball and magnetic reed switch is in the related position, make the floating ball to fluctuate within a certain scope. Using the floating ball in the magnet to attract the magnetic reed switch contact, open and close action.

5 technical parameter editor

PP, PVDF material can be used in strong acid sites; SUS304/316 metal material is suitable for high temperature and high pressure tank

Specifications junction box are the most complete, plastic, aluminum alloy, stainless steel explosion-proof type, degree of protection IP - 65 or more

Contact capacity of 50 w / 250 vac SPST or 40 w / 250 vac SPDT

In place of the flange with JIS, DIN, ANSI specifications; The threaded NPT, PF, BSP and other specifications

To do more control, easy to install, save costs

Length: 7.6 Cm to 2.4 m

Connecting rod ball float liquid level switch [1]

Accuracy: + / - 3 mm

Repeatability: + / - 1 mm

Share: minimum 0.55

Installation location: vertical install plus or minus 30 degrees

Switch set point: 1-5 (factory setting)

Contact types: SPST reeds

Contact capacity: 240 vac/VDC @ 60 va

Get an electric shock output: normally open

Working temperature: - 40 degrees to 200 degrees

Ambient temperature: - 40 degrees to 60 degrees

Installation height: 13.2 Cm

Pressure: 13.8 bar

Protection grade: IP65

The shell material: PP. UL94VO

Connection: 12 column, jack

Electrical interface: 1/2 "NPT

The installation interface: 2 "NPT

Rating: universal

Certification: ROSH

Special specifications can be customized