Home > Products > Electronics & Electricity > Other Electrical & Electronic

MINI LED SQUARE PANEL LIGHT

Product Description:

Frame material: AL6063 aluminum extrusion profiles, and do oxidation process, make the surface more beautiful. Use high optical light guide plate material, make lamp higher luminous efficiency.
Source: Use low-power SMD LED
Installation: Embedded
Related Certification: CE certification; ROSH certification
Energy Saving: Up to 50% energy saving, high brightness, special different visual angles, design diversification.
Frame Color: silver, white
Wide-angle light: 120 degrees with light

Product Parameter:

Item No: DMR01-2835T3W
Product Size: 93*93mm/120*120mm/150*150mm/173*173mm/195*195mm/225*225mm
Mounting Hole: 70*70mm/100*100mm/129*129mm/148*148mm/172*172mm/200*200mm
Power: 3W/6W/9W/12W/15W/18W
LED Type: SMD2835
Luminous Flux: 75LM/W
Input Voltage: AC85-265V
Power Factor: >0.5
CCT: 2800-6500K
Ra: >70

Product Application:

Round LED panel light is widely used lighting malls and other places. The light is soft, attractive appearance; pollution and slim design; energy saving, environmental protection; light decay, long life. The hotel corridors aisle, factories, offices, commercial establishments to negotiate, residential, institutional and other buildings, schools, hospitals, need energy saving and high color rendering index of places.

Product Adavntages:
Epistar chips:   ighlighted SMD2835 chip provides high lumen output, each chip can produce up to 26lm

Surface teatment:   The use of powder coating technology has made a very smooth surface, which makes the aluminum body has excellent anti-fade effect

Isolated IC Driver:   Intelligent constant current IC driver can safely isolate the electromagnetic interference and greatly upgrades the power supply stability

Product Safety

1 power supply, drives, cable and other lighting accessories need to use under "shut off" situation, is not suitable for other lamps
2 Let the children away from the product, but can not let the children touch live equipment
3 Avoid prolonged direct view of lamps emitting surface
4 products away from open flame or hot object
5 Before cleaning lamps, turn off the power
6. clean with a dry cloth, you can not use chemical or corrosive cleaning objects

Simple approach

Lamp is not lit:

Reason: No power to fixture
Solution: Check the power switch, which was placed in the "off" state inspection lamps, drives, power is in good

Connection Status
     
       Lamps have other faults, maintenance required of professionals

If you need know more information, pls contact us by email.