Home > Products > Industrial Supplies > Machinery > Welding Machinery

EWNR H08A H08E SWRY11 E.Q Wire Rod 1
  • EWNR H08A H08E SWRY11 E.Q Wire Rod 1

EWNR H08A H08E SWRY11 E.Q Wire Rod

Model:EWNR H08A H08E
Brand:EWNR H08A H08E SWRY11 E.Q Wire Rod
Origin:Made In India
Category:Industrial Supplies / Machinery / Welding Machinery
Label:EWNR EQ Wire Rod , SWRY11 Wire Rod , E.Q Quality Wire Rod
Price: -
Min. Order:-
Inquire Now Add to Basket

Member Information



Biz MemberIndia
Live Chat:Last Online:19 Nov, 2019

Product Description

EWNR H08A H08E SWRY11 E.Q Wire Rod

We are Stockholder & Distributors of Hot Rolled EQ Steel Wire Rods, Hot Rolled E.Q Steel Wire Rods, Electrode Quality Wire Rod, IS:2879 Wire Rods, IS-2879 Wire Rods, ERW Wire Rods, EWNR Wire Rods, H08A Wire Rods, H08E Wire Rods, JIS G3503 Wire Rods, SWRY11 Wire Rods, SWRY-11 Wire Rods, Jindal make Wire Rods, JSW Make Wire Rods, VSP Make Wire Rods, Mukand Make Wire Rods, Sunflag Make Wire Rods, Bhushan Make Wire Rods, Usha Martin Make Wire Rods, TATA Steel Make Wire Rods, POSCO Make Wire Rods, KOBE Steel Make Wire Rods, DAIDO Steel Make Wire Rods, JFE Steel Make Wire Rod, Nippon Steel & Sumitomo Metal Make Wire Rod


Electrode Quality Wire Rod

EQ / E.Q Wire Rod

IS2879 / IS 2879 / IS-2879 / IS:2879:1998 Electrodes Quality Wire Rod

IS 2879 Grade EWR Wire Rod

IS 2978 Grade EWNR Wire Rod

JIS G3503 / JIS-G3503 / JIS G-3503 Wire Rod

JIS G3503 Grade SWRY 11 / SWRY-11 Wire Rod

GB/T3429 / GB T3429  / GB/T3429:2002 Wire Rod

GB/T3429 Grade H08A Wire Rod

GB/T3429 Grade H08E Wire Rod

GB/T3429 Grade H08MnA Wire Rod

Electrode quality steel for core wire of covered electrodes

Covered welding electrode is a delicate tool which while in use combines physical, chemical, and metallurgical processes of the flux, core wire and parent metal to achieve a durable weld joint or surfacing. Covered welding electrodes are used in manual metal arc welding (MMAW) process.

During the 1890’s, electric arc welding was accomplished with bare metal electrodes. The welds produced were porous and brittle because the molten weld puddle absorbed large quantities of oxygen and nitrogen from the atmosphere. Since 1927, many improvements have been made and many different types of electrodes have been developed and produced through variations in the formulations of the covering and the amount of covering on the mild steel core wire. Commercial production of welding electrodes was started in India in early 1960s.

Mild steel covered electrodes, also commonly called coated electrodes, consist of only two major elements namely the core wire or rod and the flux covering. The raw material for the core wire is hot rolled wire rod which is supplied in coil form. Wire rod is cleaned, drawn down to the proper electrode diameter, straightened, and cut to the required electrode length. The most popular diameter of wire rod is 5.5 mm, although larger diameters are also used in a limited way. In covered welding electrode the product mix is of mild steel electrodes (around 60 %), mild steel high tensile and low hydrogen low alloy (around 30 %) and special type (around 10 %). Fig 1 shows EQ steel wire rod, EQ steel drawn wire and covered welding electrode.

Fig 1 EQ steel wire rod, EQ steel drawn wire and covered welding electrode.

 Core wire is an important component of a manual electrode since it significantly influences the electrode performance and weld metal properties. Electrode quality (EQ) steels consist of both rimming and non rimming quality steels which are used for the core wire of the mild steel and low alloy steel electrodes although rimming quality steel is preferred. The starting material for rimming steel core wire is ingot whereas for non rimming quality steel core wire it is either bloom or billet. The characteristic features of the rimmed steel are a high oxygen content (typically 200 -400 ppm) and a rim of almost pure iron on the surface.

It is preferred to produce semi killed or fully killed EQ steels because they are cheaper and easier to produce and also because they confer optimum performance characteristics on the electrode. Since it is possible to obtain any desired alloy steel chemistry of the weld metal by incorporating suitable alloying elements in the flux coating, covered electrode manufacturer uses a single grade of rimming quality steel to produce a wide range of mild steel, low alloy steel and hardfacing electrodes. EQ steels are having low percentage of carbon, silicon and aluminum. Further sulphur and phosphorus control is very important in EQ steels. The sulfur and phosphorous levels must be kept very low since they can cause undesirable brittleness in the weld metal. Integrated steel plants have established metallurgy, drawability and consistency of producing non rimming killed EQ steels by Concast route. This route of EQ steel production has led to tramp element free steel.

Composition of rimming and non rimming steels used for core wire is given in Tab. 1

Tab 1 Composition of electrode quality steel for core wire





Non rimming



0.1 max

0.1 max



0.03 max

0.03 max















0.15 max

0.15 max



0.005 max

0.005 max



0.003 max

0.003 max



0.012 max

0.012 max

Quality of wire rods of EQ steels needed for core wire of covered electrodes

Besides chemical composition there are several quality requirements from the wire rods of EQ steels which are expected by the EQ steels user. These are enumerated below.

  • The chemical composition of the wire rod must meet special weldability requirements and, at the same time, it must not affect the microstructure of the manufactured wire rod to maintain the reduction capabilities as required.
  • The EQ steel wire rods should be free of injurious impurities (tramp elements) and should contain stable amount of components
  • The wire rods are to be produced by slow cooling operation in the heat treatment section of the wire rod mill to ensure the good workability of wire rod during its drawing.
  • Wire rods should have good surface quality as well as internal soundness. In order to improve the surface quality of wire rods, the surfaces of the billets are descaled by shot blasting. Then the surface is inspected for any surface flaw and imperfection by a magnetic particle tester. The flaws are removed from the surface by using a grinding machine. In addition, the continuous ultrasonic testing is conducted to guarantee the internal quality of the billets.

Welding Electrode Grades Steel Wire Rod

These specifications are described for wire rods as per JIS G 3503 or AWS standards used for core wire of mild steel electrodes for arc welding of structural steels and Copper coated CO2 welding wire (MIG) for submerged gas welding.

Product range : 5.5, 6.0, & 6.5 mm (or any other agreed diameter) tolerance ± 0.30 mm of diameter
Type of cooling : Retarded / Stelmor type of cooling
Coil weight : 1550 kg approximately
Coil dimensions : ID : 850 mm; OD : 1250 mm


Company Standard as per JIS G 3503 or AWS

JIS G 3503 
% C
% Mn % P
% S
% Si
% Cu
Typical End Use
SWRY11 0.09 0.35/0.65 0.020 0.023 0.03 0.20

UTS-430 N/mm2 MAX
%EL = 30 MIN

Stick electrodes


CO2 Gas Welding Rod for MIG/TIG Wire

Grade Equivalent to % C % Mn % P
% S
% Si % Cu
Min %
ER-70-S4 0.040/0.10 1.00/1.35 0.025 0.025 0.50/0.70 0.10 520 80
ER-70-S6 0.040/0.10 1.00/1.70 0.025 0.025 0.85/1.05 0.10 (SG2) 550 75
EM 12K 0.060/0.12 0.80/1.20 0.025 0.025 0.05/0.35 0.15 (S2) 600 65
EM 12 0.06/0.12 0.8/1.20 0.025 0.025 0.05/0.1 0.15 550 65


Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3    

If you have any requirement of above items, please feel free to contact us




Mobile No. 0091 - 9820292499     
Email - 

( A METAL & STEEL Company )     
MUMBAI - 400002, INDIA.     
TEL.No. 0091-22-23858802     
TEL.No. 0091-22-23823963     
FAX No. 0091-22-23898724     
Email - 
Website – www.rolexmetals.com


CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com


COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com

WAREHOUSE MANAGER – warehouse@rolexmetals.com

SALES DOMESTIC – salesdomestic@rolexmetals.com

SALES INTERNATIONAL – salesinternational@rolexmetals.com

SALES GENERAL – sales@rolexmetals.com

PURCHASE GENERAL – purchase@rolexmetals.com

FINANCE MANAGER – finance@rolexmetals.com

ACCOUNTS MANAGER – accounts@rolexmetals.com

GENERAL INFORMATION – info@rolexmetals.com


EXPORT MANAGER – export@rolexmetals.com

IMPORT MANAGER – import@rolexmetals.com

AIR EXPORT – airexport@rolexmetals.com

SEA EXPORT – seaexport@rolexmetals.com

CUSTOMS – customs@rolexmetals.com


AIR FREIGHT – airfreight@rolexmetals.com

SEA FREIGHT – seafreight@rolexmetals.com

DESPATCH – despatch@rolexmetals.com

INSPECTION – inspection@rolexmetals.com

LOGISTICS – logistics@rolexmetals.com

TRANSPORT – transport@rolexmetals.com


KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com

TALOJA WAREHOUSE – taloja@rolexmetals.com

KHOPOLI WAREHOUSE – khopoli@rolexmetals.com

NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com

KANDLA WAREHOUSE – kandla@rolexmetals.com

MUMBAI WAREHOUSE – mumbai@rolexmetals.com

STOCKYARD – stockyard@rolexmetals.com


SERVICE – service@rolexmetals.com

SUPPORT – support@rolexmetals.com

RECRUITMENT – career@rolexmetals.com

WEBMASTER – webmaster@rolexmetals.com

CUSTOMER CARE – customercare@rolexmetals.com



Product Image

EWNR H08A H08E SWRY11 E.Q Wire Rod 1
Img 1

Send Inquiry to this Member




Related Products of this Company

This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Welding Machinery Made In China Products


Welding Machinery China Suppliers and China Manufacturers