| Model: | 002 |
|---|---|
| Brand: | BX |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Power Transmission Equipment & Transformer |
| Label: | power tower , transmission tower , galvanized tower |
| Price: |
US $1050
/ ton
|
| Min. Order: | 10 ton |
| Live Chat: | Last Online:04 Dec, 2014 |
Galvanized Lattice Transmission Steel Tower
1. Main Products:
Boxiang Steel Structure is a professional manufacturer of steel towers. We engineers and fabricates different types of transmission tower such as 10kv, 33kv, 66kv, 69kv, 110kv, 132kv, 220kv, 230kv, 400kv, and 500kv, Single Circuit, Double Circuit, and Multi Circuit Lattice Tower. And also We mainly deal with galvanized angle steel tower. Different types of towers in a complete transmission line as Crossing Tower, Tension Tower, Angle Tower, Terminal Tower, Transposition Tower are available.
2. Products Fabrication Process
The transmission towers are manufactured in complete knocked-down condition following the procedures as per our quality assurance plan. The general of production procedure is briefly describled as Fabrication and Galvanizing. Process of fabrication comprises of cutting, satmping, strengthening, punching, notching, bending and heel grinding. Then the products are ready for galvanizing which is one of critical process in all production.
Details of Galvanizing:
1. Degreasing of tower parts with Sodium Hydroxide solution.
2. Pickling to clean up the surface with HCl solution
3. Rinsing twice with fresh water to remove the acid content.
4. Fluxing wth synth flux to prepare surface for galvanizing.
5. Drying on hot plate.
6. Dipping in zinc bath with 99.95% pure zinc at 450° C to 465° C temperature.
7. Quenching in water.
8. Dichromating.
Thickness< 5mm, galvanization thickness≥ 460G/M² (65um)
Thickness> 5mm, galvanization thickness≥ 610G/M² (86um)
All our galvanizing zinc thickness is strictly tested before delivery in view of its importance.
3. Our Products Advantages
We fabricates every tower by solid steel legs and angle iron cross members & pipes. tower can reach heights up to 200 meter. Boxiang Steel is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
Other Terms:
1. Price Term: EXW, FOB, CFR or CIF.
The price includes pole shaft, base plate, crossarm and anchor part.
Shipping seaport: Qingdao Port. For FOB, CFR or CIF price, please specify which exact model you need, and tell us your order quantity so that we can calculate the local transport charges and sea freight.
2. MOQ: 1 SETS
3. Payment: Typically 30% by T/T as deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.
4. Package: Plastic paper or according to clients requirement.
5. Delivery: for 30 sets, goods can be ready for shipment within 20 workdays after receiving deposit.
6. Parts Design Service Period: 20 years.
Always Welcome to contact us for further information.
Address: Industrial Park of Jiaolai Town, Jiaozhou, Qingdao, China.
Tel: 86-532-88221819 Fax: 86-532-88225688 Phone: 86-15666681682
| Height | From 9 meter to 100 meter | ||
| Suit for | Electric Power Transmission and Distribution | ||
| Shape | Angle | ||
| Material | Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm²
Q235B/A36, Minimum Yield Strength ≥ 235 N/mm² As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400 |
||
| Power Capacity | 10KV to 500KV | ||
| Tolerance
of the dimension |
According to your requirement. | ||
| Surface treatment | Hot dip galvanized Following ASTM A 123, or any other standard by client required.
Thickness< 5mm, galvanization thickness≥ 460G/M² (65um) Thickness> 5mm, galvanization thickness≥ 610G/M² (86um) |
||
| Joint of Section | bolts and nuts. | ||
| Standard | ISO 9001:2008 | ||
| Length of per section | According to your request. | ||
| Welding Standard | AWS (American Welding Society ) D 1.1
CO2 welding or Submerged arc auto methods |
||
| Thickness | 1 mm to 36mm | ||
| Production Process | Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages | ||
| Capacity | Product | Annual Production Capacity(TON) | Monthly Production Capacity(TON) |
| 1 | Tubular Tower | 24000 | 2000 |
| 2 | AngleTower | 24000 | 2000 |
| 3 | Steel Structure | 12000 | 1000 |
| 4 | Total Production Capacity | 60000 | 5000
|
| Payment Terms: | TT/LC |
|---|---|
