|Category:||Metallurgy , Mining & Energy / New Energy / Solar Energy|
|Label:||pressurized solar wa , closed solar heater|
|Specifications:||-Inner tank: SUS 304-2B food grade stainless steel/Porcelain enamel.
-Outer tank: Galvanized steel/color steel/stainless steel
-Frame: Galvanized sheet with electrostatic plastic coating 1.5mm
-Vacuum tube: 3 Targets of SC tube with heat pipe.
-Operation pressure : 0.6Mpa.
-Polyurethane: thickness 55-60mm.
-Angle: Adjust it according to different countries’ latitude and usage.
|Advantages:||★There is not any water in the vacuum tube, the heat pipe inside each of vacuum tube, thus the water will not flow out if the tube is damage under very cold climate, and it can still operate as usual
★The .inner tank is pressure tank, it is tested by 1.2Mpa pressure.
★Before using the hot water, open the hot water outlet value to let hot water in the tank flow down automatically which is corresponding with the water supply pressure. More higher pressure cold water tap, more stronger flowing rate of the hot water for user.
★When the sunshine is weak for several days, the water in the tank can be heated by electric heater, .but remember to shut it off before taking shower.
★This system is closed system, so it can save heat energy better than the open system.