Home > Products > Industrial Supplies > Other Industrial Supplies

Product information
This machine is inner-tank heating type. There is F chemical element on the heating roller surface, this can ensure PVC heat average and the mould form well. It won’t waste any PVC material when you start or stop machine. Form bubbles, feed pills, emboss & heat-sealing, print series No., cut into pieces, all these action can be done continuously. Our machine adopt no-edge cut, it can save material about 4-6%.
ApplicationDPT-70 blister packing machine is small medicine packing machine, the whole machine is transmitted by gear, low noise and easy maintenance. We choose common use feeding material device to suit for different shape pills. It can print series number, it seals good and suits for different dimensions capsule, tablet, dragee, pill and also chocolate bean, chewing gum.
Parameter:

 Machine Type       DPT-70                                                             DPT-130/125/140
 Raw material          PVC70×0.25mm/PTP70×0.02mm                   PVC130×0.25mm/PTP130×0.02mm
 Forming depth        Max：15mm                                                   Max：15mm
 Working speed       17000-48000 pcs/h                                         40000-80000pcs/h
 Press/Cut times       25-35 time/min                                              20－35 time/min
 packing range         capsule, tablet, dragee, pill                             capsule, tablet, dragee, pill
 water consumption  2.91L/min                                                       2.91L/min
Power consumption   2.5KW                                                            3.0KW
 Voltage                      220V                                                              380V
 dimension                （L*W*H)1230×600×1000                            （L*W*H)1600×800×1240
 Weight                       150kg                                                            410kg

Explanation
1、DPT-70, DPV-130, 70 means working width is 70mm and 130mm
2、DPT-70 only can produce one piece, max piece can pack three rows
Different from our competitors’
Laymax Competitors’
Rotating rollers Flat type, it will cause mould broken, whole machine is big, waste much more raw material
Absorb bubbles Blow bubbles
Gear transmit, can seal more tightly  Chain or belt
Two motor, feed material soon and auto feed material Only one motor
Forming mould change
1、If the whole piece dimension is changed, the forming mould, heat-seal film, press/cut should be changed together
2、If whole piece dimension is not changed, but the bubble position is changed, only need change forming mould, heat-sealed film.