Home > Products > Electronics & Electricity > Electronic Components > Capacitor

Product name:Safety capacitor x1 Introduction:ACROSS-THE-LINE AND INTERFERENCE SUPPRESSION CAPACITOIR CLASS X1 --- CTXREFERENCE STANDARDS:UL 60384-14 ,DIN EN 60384-14:2005；

CQC GB/T14472-1998

K60384-14

USED FOR RADIO INTERFERENCE SUPPRESSION CAPACITORS.RATED VOLTAGE : /310/350 VAC, 50 ~ 60 HzCAPACITANCE RANGE : 0.0047 μＦ ~ 10μＦCAPACITANCE TOLERANCE : J (±5﹪), K (±10﹪), M (±20﹪)DIELECTRIC : METALLIZED POLYPROPYLENE FILMDISSIPATION FACTOR TAN δ : LESS THAN ≤0.1﹪ AT 1K Hz/20 ℃ ,VOLTAGE 1.0 VAC ( CAPACITANCE：1K Hz/20℃,VOLTAGE 1.0 VAC )INSULATION RESISTANCE : BETWEEN TERMINALSLESS THAN OR EQUAL TO 0.33 μF ≧ 3 x 104 MΩGREATER THAN 0.33 μF ≧ 1 x 104 MΩ / μFMEASURED AT 100 ± 15 VDC, 60 Sec./20 ℃WITHSTAND VOLTAGE :(1)APPLIED 1,333 VDC FOR 1 SEC.(2)BETWEEN TERMIANLS AND CASE…2200VAC 60HZ FOR 60 SEC.CLIMATIC CATEGORY : IN ACCORDANCE WITH DIN 40040 GMFG (MINIMUM LIMIT TEMPERATURE) = - 40 ℃M (MAXIMUM LIMIT TEMPERATURE) = + 110 ℃F (HUMIDITY CATEGORY) = AVERAGE RELATIVE HUMIDITY ≦ 75﹪95﹪ FOR 30 DAYS PER YEAR CONTINUOSLY

85﹪ FOR THE REMAINING DAYS OCCASIONALLYDRY HEAT RESISTANCE :IN ACCORDANCE WITH DIN 40046 SHEET 1 OR IEC 68-2-2 TEST BA. CONDITIONSTEST TEMPERATURE : 100 ± 2 ℃TEST DURATION : 16 HOURSTEST CRITERIA :APPEARANCE : NO VISIBLE DAMAGE AND NO LEAKAGEWITHSTAND VOLTAGE : 0.66 x RATED WITHSTAND VOLTAGE 60 Sec.CAPACITANCE CHANGE : ≦±5﹪ OF THE INITIAL VALUEINSULATION RESISTANCE : ≧50﹪ OF INITIAL SPECIFIED VALUECOLD RESISTANCE :IN ACCORDANCE WITH DIN 40046 SHEET 1 OR IEC 68-2-1 TEST BA. CONDITIONS

TEST TEMPERATURE : -40 ± 2 ℃

TEST DURATION : 2 HOURS

TEST CRITERIA :APPEARANCE : NO VISIBLE DAMAGEWITHSTAND VOLTAGE : 0.66 x RATED WITHSTAND VOLTAGE 60 Sec.CAPACITANCE CHANGE : ≦ ± 5 ﹪ OF THE INITIAL VALUEHUMIDITY TEST CONDITIONS :TEST TEMPERATURE : 40 ℃ ± 2 ℃RELATIVE HUMIDITY : 90 – 95 ﹪TEST DURATION : 500 HOURSTEST CRITERIA :WITHSTAND VOLTAGE : 0.66 x RATED WITHSTAND VOLTAGE 60 Sec.CAPACITANCE DRIFT : ≦ ± 5 ﹪OF THE INITIAL VALUEDISSIPATION FACTOR : ≦200 ﹪OF INITIAL SPECIFIED VALUEINSULATION RESISTANCE : ≧50 ﹪OF INITIAL SPECIFIED VALUE13. LIFE TEST CONDITIONS:

TEST TEMPERATURE : 100 ℃ ± 3 ℃

TEST VOLTAGE : 440 VAC AND 880 VAC/60 HZ FOR A PERIOD OF 0.1 Sec.

ONCE EACH HOUR

TEST DURATION : 1,008 HOURS

TEST CRITERIA :APPEARANCE : NO VISIBLE DAMAGE AND NO LEAKAGEWITHSTAND VOLTAGE : 0.66 x RATED WITHSTAND VOLTAGE 60 Sec.CAPACITANCE DRIFT : ≦ ±3 ﹪OF THE INITIAL VALUEDISSIPATION FACTOR : ≦ 0.6 x 10 (0.06 ﹪) OF INCREASED VALUEINSULATION RESISTANCE : ≧ 50 ﹪OF SPECIFIED VALUESOLDERABILITY CONDITIONS :SOLDER BATH TEMPERATURE & MATERIAL :230 ± 5℃, 60% OF TIN(Sn) + 40% OF LEAD (Pb)SOLDER BATH TEMPERATURE & MATERIAL :270 ± 5℃, 99.96% OF TIN(Sn) + 0.04% OF SILVER(Ag)SOLDER TIME : 3 ± 0.5 Sec. TEST CRITERIA :75% OF THE SURFACE TINNINGSOLDERING HEAT RESISTANCE :IN ACCORDANCE WITH DIN 40046 SHEET 18 OR IEC 68-2-20 TEST TA.1＆TB.1

CONDITIONS

SOLDER BATH TEMPERATURE : 270 ± 5 ℃

SOLDER TIME : 5 ± 1 Sec.

CAPACITANCE BODY MAY LIE ON PRINTING CIRCUIT BOARD

TEST CRITERIA :APPEARANCE : NO DAMAGE AND GOOD TINNINGCAPACITANCE CHANGE : ≦ ± 3 ﹪OF THE INITIAL VALUEVIBRATION RESISTANCE :IN ACCORDANCE WITH DIN 40046 SHEET 8 OR IEC 68-2-6 TEST FC CONDITIONS

FREQUENCE RANGE : 10 - 55 HZ

DISPLACEMENT AMPLITUDE : 0.75 mm

CONFORMING TO MAX. : 10 g

TEST DURATION : 6 HOURS

TEST CRITERIA :APPEARANCE : NO VISIBLE DAMAGECAPACITANCE CHANGE : ≦ ± 2 ﹪ OF THE INITIAL VALUE 17. TENSILE STRENGTH OF TERMINALS

IN ACCORDANCE WITH DIN 40046 SHEET 19 OR IEC 68-2-21 TEST UA.1 CONDITIONS

TERMINAL LOAD FORCE HOLDING TIMES

DIA. (mm) KG (N) Sec.

≦0.5 0.5 (5) 10

＞0.5 TO ＜0.8 1.0 (10) 10

＞0.8 2.0 (20) 20

TEST CRITERIA :

NO WIRE BREAKAGE AND NO DAMAGE OF CAPACITOR

18. BENDING OF TERMINALSIN ACCORDANCE WITH DIN 40046 SHEET 19 OR IEC 68-2-21 TEST UB. CONDITIONSLOAD FORCE : 0.5 KG (5N)BENDING TIME : TWO CONSECUTIVE BENDS (4 x 90 ℃)TEST CRITERIA :NO WIRE BREAKAGE AND DAMAGE OF CAPACITORMARKING :CAPACITORS ARE MARKED WITH TYPE IDENTIFICATION CAPACITANCE, CAPACITANCE

TOLERANCE, RATED VOLTAGE, TEMPERATURE RANGE, NAME OF MANUFACTURE,DATE

OF MANUFACTURE AND APPROVED CERTIFICATION MARKS.

MARKING EXAMPLE :APPROVED BY :UL、CUL FILE NO. E193049 E222897 (0.0047Uf/310V~10Uf/310V)CQC FILE NO. CQC03001008997 (0.0047Uf/300V~4.7Uf/300V)FILE NO. CAP-11CA51021-A-1 0.0047Uf/310V~10Uf/310V)FILE NO.HU03009-5001A FILE NO.HU03009-5002A

FILE NO.HU03009-5003A FILE NO.HU03009-5001B21.MARKING EXAMPLE :

CAPACITORS ARE MARKED WITH TYPE IDENTIFICATION CAPACITANCE,

CAPACITANCE TOLERANCE, RATED VOLTAGE, TEMPERATURE RANGE,

NAME OF MANUFACTURE,DATE OF MANUFACTURE AND APPROVED

ERTIFICATION MARKS.