Home > Products > Industrial Supplies > Electrical & Electronic Product Equipment

This machine is used for the first process of motor stator producing, it conducts gang control the machine winding main shaft/transfer cup indexing shaft, dip mold motor shaft through CNC/PLC control system assembly, and winds various types of enamelled copper wires.

The following are descriptions of RX01 Semi-auto coil winding machine: wire diameter range    is between 0.1 and 1.0mm; winding width is less than or equal to 190mm; winding diameter is less than or equal to 280mm; effective distance between winding shafts is 520mm; distance of classes    is less than or equal to 190mm; Max. winding speed can be up to 3000RPM; air pressure is between 0.4 and 0.7MPa; power supply is 220v/50Hz; power is    0.75Kw; dimension (L*W*H) is 1420mm * 1300mm * 1500mm respectively and the weight    is about 550kg.

This machine can be made multi-type, multi-layer winding, is able to wind 1-10 wires at the same time, can automatically groove Automatic tap, equipped with two square shaft winding used alternately, its adaptable wire diameter ranges from  ￠25 to ￠180 mm.
Starting winding point , linewidth, winding speed, slow start, slow stop, row line direction, parking on both ends, Automatic homing, automatic starting, automatic slot, auto tap, etc can be set automatically.
Ribbon cable on the slider is equipped with 1-10 of pay-off arm, high and low Angle can be arbitrarily adjusted;
Equipped with 1-20 ￠210 mm * 320 mm steel barrels; 
Equipped with a complete set of 16 mm * 16 mm * 625 mm square shaft; 
High efficiency and easy operation;
OEM available, same quality  much lower price.