| Model: | HY918 |
|---|---|
| Brand: | hong ye silicone |
| Origin: | Made In China |
| Category: | Chemicals / Rubber Materials |
| Label: | silicone rubber , rtv silicone , mold making silicone |
| Price: |
US $18
/ kg
|
| Min. Order: | 100 kg |
| Live Chat: | Last Online:09 Aug, 2014 |
Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Operation Instructions:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,when it turns dry,you can take the product out,then the mold is done.
Shelf life
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing
20kgs/drum vacuumed packing
Dear friend ,
This is Ms Monica from Shenzhen Hongye silicone rubber company. We have more than 15 years experience in this field . Any more information, pls feel free to contact Ms. Monica:
E-mail: monicasilicone(at)gmail(dot)com
Tel: 0086-0755-89948006
Fax 0086-0755-89948030
Skype: monicasilicone
Wechat ID: ete394
Website: www(dot)szrl(dot)net
Thanks and regards.
Monica
Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Operation Instructions:
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,when it turns dry,you can take the product out,then the mold is done.
Shelf life
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing
20kgs/drum vacuumed packing
Dear friend ,
This is Ms Monica from Shenzhen Hongye silicone rubber company. We have more than 15 years experience in this field . Any more information, pls feel free to contact Ms. Monica:
E-mail: monicasilicone(at)gmail(dot)com
Tel: 0086-0755-89948006
Fax 0086-0755-89948030
Skype: monicasilicone
Wechat ID: ete394
Website: www(dot)szrl(dot)net
Thanks and regards.
Monica
