| Model: | YH-24KWDG |
|---|---|
| Brand: | Yinghe |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Motors |
| Label: | generator , 3 phase generator , 24 diesel generator |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:04 Sep, 2014 |
Electric generator set series
This kind of Electric generator set series contains two section:
generator+ diesel engine.
The introduction of the generator:
After the form a complete set of the electric generator and thediesel engine, the whole part can be used as fixed or movable
small power stations, serving as the power of the lighting and momentum for countryside, cities and towns, construction site and pasturing area,etc. It also can be the emergency standby power.
This series of electric generator adopts rotating magnetic fieldtype, and the engine base and end cover are made from cast iron.
This series of generator can be connected to engine directly oruse the v belt connection. It also can be rotate both positive and negative direction and continuous rated working. It is safe and reliable to use and easy to maintain.
Technical parameters of the generator
|
Item |
24KW electric generator |
|
Model |
STC-24 Three-phase A.C. Synchronous generators |
|
Rated power |
24kw |
|
Rated voltage |
400V |
|
Rated current |
43.3A |
|
Rated frequency |
50 Hz |
|
Rated speed |
1500 r/min |
|
Power factor |
0.8 |
|
Excitation voltage |
94V |
|
Excitation current |
6.4A |
|
Number of poles |
4 |
|
Working system |
S1 |
|
Insulation class |
B |
|
Protection class |
IP 21 |
The main technical specifications of diesel engine
|
Item |
Diesel engine |
|
Model |
L32 |
|
Type |
Single cylinder, horizontal, four-stroke |
|
Type of combustion chamber |
Direct injection |
|
Cylinder diameter(mm) |
130 |
|
Piston stroke(mm) |
125 |
|
Swept volume (L) |
1.659 |
|
Rated power (KW) |
23 |
|
Rated speed(r/min) |
2200 |
|
Specific fuel consumption g/kW.h |
≤244.8 |
|
Specific oil consumption g/kW.h |
≤2.04 |
|
Cooling way |
Evaporative cooling |
|
Starting way |
Hand starting |
|
Oil injection pressure MPa |
20°-1 |
|
Net weight kg |
212 |
|
Dimensions(Length*width*height) (mm) |
916*475*723 |
