| Model: | MP300 |
|---|---|
| Brand: | OME |
| Origin: | Made In China |
| Category: | Computers & AV Digital / Computer Accessories / Printer |
| Label: | Android printer , mobile printer |
| Price: |
US $70
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:31 Jul, 2014 |
Wireless Android Thermal Mobile Label Printer
Description:
Remote upgrade---Unique Flash technology，don’t need to send back to original industry when software upgrade
As customer need, when we have to printer’s internal procedure or font that original industry defaulted, the printer can upgrade remotely by the following method.
1）Upgraded the printer, need a data cable, one is standard USB, another is mini-USB, that is MP3 data cable(common）.
2）the standard USB connect to the computer，the other end connect to the printer and computer.
3）A USB removable disk appears on the PC interface, remove the original program first, then copy new program to this flash drive.
Automatic sleep/wake up-- save power,extend using time
When power on, if the host didn’t send data to printer within 1 minute and didn’t use the printer，it will enter sleep mode. After sleep, status light will turn to red slow flashing. It will wake up automatically when receive printing data.
Automatic Power off
The printer will power off automatically if it didn’t receive any data within 2 hours.
|
Module |
MP300/MP350 |
|
Print method |
Thermal printing |
|
Paper width |
58mm |
|
Effective print width |
48mm |
|
Weight( g) |
205g |
|
Roll diameter |
≤30mm |
|
Print dot matrix |
384 dots / line |
|
Built-in font |
ASCII font(16×8、24×12)、GBK(16×16、24×24) |
|
Print speed |
50~70mm/s |
|
The length of a single charge can be printed |
On 12.5% print density 150~200m, if each length is 150mm, it can print more than 1200 piece; On 25% print density 80~100m |
|
Printable content |
English ,members ,symbols, characters, graphics, curve, pre-stored icons
|
|
resolution |
203DPI/8 dots /mm |
|
Data communication interface |
Bluetooth / RS232 |
|
power |
1000mAh 7.4V lithium ion power , 2~4 hour to full |
|
Charging method |
Charge with machine/optional changer |
|
Anomaly detection |
Out of paper detection/power detection/switch cover detection |
|
Black mark detection |
Support |
|
Paper loading method |
Easy paper loading structure |
|
Instruction set |
ESC/POS compatible instruction set |
|
Cutting method |
Manual tear |
|
Use environment |
temperature -10℃~50℃,humidity 20%~85% |
|
Charge environment |
temperature 5℃~40℃,humidity 20%~85% |
|
Store environment |
Temperature -20℃~70℃,humidity 5%~95% |
|
Standard accessory |
Thermal paper, power charger, battery |
|
Optional accessory |
Dedicated serial data wire/portable units |
