100W 24V Switching Power Supply
Product Description
| Model |
HS-100-5 |
HS-100-12 |
HS-100-15 |
HS-100-24 |
HS-100-36 |
HS-100-48 |
| output |
DC voltage |
5V |
12V |
15V |
24V |
36V |
48V |
| Voltage tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
| Rated current |
20A |
8.3A |
6.7A |
4.2A |
2.8A |
2A |
| Current range |
0~20A |
0~8.3A |
0~6.7A |
0~4.2A |
0~2.8A |
0~2A |
| Rated power |
100W |
99.6W |
100.5W |
100.8W |
100.8W |
96W |
| Ripple&noise |
80mvp-p |
120mvp-p |
120mvp-p |
150mvp-p |
150mvp-p |
180mvp-p |
| DCvoltage ADJ.range |
-9%~+10% |
±10% |
±10% |
±10% |
±10% |
±10% |
| input |
Voltage range |
90~132VAC/180~264VAC(selected by switch),254~373VDC |
| frequency |
47~63HZ |
| AC current |
2.4A/115VAC,1.2A/230VAC |
| efficiency |
79% |
83% |
83% |
85% |
85% |
86% |
| Inrush current |
Cold start current18A/115VAC,36A/230VAC |
| Leakage current |
< 3.5mA/240VAC |
| protection |
overload |
Rated output power115%~150% start over load protection |
| protection type:hiccup mode,auto-recovery after fault condition is removed |
| Over voltage |
6.8~8.2V |
15.6~17.8V |
18.6~20.8V |
30.6~33.2V |
42.6~44.2V |
54.8~56.6V |
| protection type:hiccup mode,auto-recovery after fault condition is removed |
| ----- |
----- |
| ----- |
| environment |
Working temp,humidity |
-10°C~+60°C,20%~90%RH |
| Storage temp,humidity |
-20°C~+85°C,10%~95%RH non-condensing |
| Withstand vibration |
10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes |
| safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
| Fit standard |
Safety standard |
Compliance toUL1012 |
| EMC standard |
Compliance toEN55022,CLASSA |
| others |
Dimension |
159*97*38mm(L*W*H) |
| Weight/packing |
0.48kg/45pcs/22.5kg/0.041 m³/1.45CUFT |
| note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25°Cof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation. |
Product Image
Img 1
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
