Home > Products > Industrial Supplies > Rubber & Plastics Machine

PP,PE heavy printed film pelletizing line

1.What does the machine do?

The machine could help you to recycle the heavly printed plastic BOPP, CPP, HDPE, LDPE,LLDPE,PET,PA,EPE,ETC. film, bags,raffia, yarn, scrapes etc.The end products is the regular plastic pellets. The L/D 42:1, with two degassing venting will largely reduce the ink and other impurity. Also the screen changer will remove the impurities. Finally the second stage will remove the remaining ink and moisture.

The material either from post industrial material or post customer material. Note please: depends on the material condition, the material should be washed or not washed. 

2.Does the machine need large space?

The machine is small with no much space in factory. It contains one conveyor with or without metal detector, cutter compactor, extruder, degassing, pelletizing, water chute, vibration, and cenntrifugal dewatering, wind transmission and packing.

3.How does the machine work?

The machine work like these:

One person put the raw material into the belt conveyor, the metal detector detects the metal. If the metal pass, the metal detector will larm, and the belt will stop. You remove the metal the restart the metal detector. The raw material goes into the cutter compactor for cutting and compacting.The cutter compactor mount disk with rotory knives. It will work with the fited knives inside of the cutter compactor to crush the raw material and then the material will go into the entrance of the extruder connecting the cutter compactor. The extruder is with degassing and filter, each with the ability to remove the ink and impurities. After the raw material go out the extruder die head, there is the watering pelletizing or strand pelletizing. It will cut the  material into the small regular pellets. Then the cutted pellets go to the centrifugal dewatering to dewater and then go to the vibration and wind tranmission channel for the next step packing.

4.Does your machine will work well on our material?

Specialised in the plastic recycling machine for more than 10 years, we have exported machine to all over the world. We have aboundant experience in the solving the plastic recycling problem. You could bring your material to our factory to test or you could visit our factory to test the machine. 

5. Will the machine be reliable?

All the machine passed the CE certificate. We will list the machine material in the quotation for you check. The motor is SIEMENS BEIDE, temperature control OMRON, SIMENS frequency controlling etc.

6. How to solve the problem when the machine go wrong?

As per customer request, we offer engineering to assist install machine in customer factory. And we will offer training and maintance tecniques. Main machine guanrantee is one year except the wearing parts. is Once any problem on machine running, we will offer first reponse. 

7. How is the payment item?

We accept 30% T/T payment in advance, and 70% payment T/T before shipping. 

8. How to accept the machine?

Once the machine finish, customer go to our factory to check and test the machine. We will offer the test material. Once satisfy, customer pay the rest money.