Home > Products > Chemicals > Other Chemicals

Product Name:  Block amino silicone oil

Product composition: more amino reactive group -modified silicone polymers 

Technical Specifications:

Appearance: Light yellow transparent oily liquid

Ionic: weak cation

Active substance content (wt.): 98 ± 1%

Viscosity (25 ℃, mPa.s): 500 ~ 1000

Specific Gravity (25 ℃, g / mL): 1.025 ~ 1.035

pH value (25 ℃): 7.0 ± 0.5

Refractive index: 1.4100 ~ 1.4200

Solubility: soluble in water , methanol , isopropanol , acetone , xylene, etc.

Performance characteristics:

1, Soluble in water, aqueous solution is extremely stable, good compatibility, can be cationic , nonionic , anionic additive complex partial use ;

2, Giving the fabric soft, smooth, plump and wrinkle -resistant properties;

3, Gives a good hydrophilic synthetic fabrics, moisture absorption, air permeability and anti-static, and anti-fouling, washable and anti- redeposition characteristics;

4, Has good resistance to acid-base properties, no floating oil, such as the use of sticky rolls;

5, With anti-yellowing, especially for high-end light-colored fabric finishing;

6, The product is green environment-friendly additives, APEO-free and other restricted substances, non-corrosive, no heavy metals and poisonous irritating gases.

Applications:

1, after for a variety of natural fibers and synthetic imitation silk , wool , linen and other fabrics hydrophilic soft finish , especially for finishing polyester imitation silk imitation silk and other fabrics;

2, Block amino silicone oil can be used for synthetic oil, wool and hair oil, dyeing and printing paint additives.

Recommended process:

Preparation of a 20% aqueous solution,

The product is 100kg, water (deionized water or tap water) 399.5 ~ 399kg, glacial acetic acid : 0.5 ~ 1kg

The product is put into a stainless steel vessel, was added slowly with stirring 10% aqueous acetic acid, then adding the remaining water until completely dissolved to obtain a colorless or pale blue transparent microemulsion.

2, In an amount of 0.3 to 0.6% of the finish bath, MgCl2 can be added as catalyst in an amount of 0.5 to finish bath 1% , if a catalyst is appropriate to extend the curing time required .

Packaging and storage:

1, 50 kg or polyethylene plastic drum or 200kg 120kg iron drum;

2, cool place (indoor), sealed, storage period of 6 months;

3, the product is non- dangerous goods, according to non- dangerous goods by land, water and air transport.