|Origin:||Made In China|
|Category:||Consumer Electronics & Lighting / Culicidal|
|Label:||mosquito killer lamp , mosquito killerlight|
|Min. Order:||1 pc|
1, The battery rated capacity of this product reach up to 6000mAH
2, Overlength life span of battery, it can charge repeatedly more than 500times
3, Adopting 16 long life span, high brightness and imported white-light LED. And the time of the LED brightness up to 10-12 hours.
4, This product does will in killing the mosquito, which can electric shock a variety of mosquito effectively. Only use for killing the mosquito, it can use about 3 days. (the specific depending on the number of the mosquito)
5, This product has the solar battery charging function, When it charge 10hours(according to the local sunlight), if only use solar battery charging, you no need to pay any fee about the electricity. In the same time, you also can use the 220V mains charging. THe charging time is about 8-10hours.
6, This product has the function of activating hight-operated. WHen the switch play in the ON state, and only use for killing the mosquito, and be the solar battery charging condition, the function of killing mosquiti does not start. After the day get dark, the function of killing mosquiti will start automatically. This product has the function of smart start and shut off, which is quite suitable for those environment no one watch over. Likewise, the function of killing mosquito does not start be the mains charging condition. This product equips handle, and it very convenient to operate.
How to use:
1, Selection: Use an approprate number of fly-killer lights according to the pests' denseness and the space's size, for achieving a better effect to kill pests.
2, Charging by solar: Place the solar panels in the sun, and connect the DC plug of the solar panel to the DC socket of the lamp. It is charging when there is a lighting directive.
Charging by mains: Make sure that the voltage and the power frequency is consistent with the product before using. Use the socket matching to the product and let the socket's earth wire be well prounded. Then it is ok to connect the power for charging.
3, Making the main switch to ON and the deputy switch to the lever of PURPLE LIGHT(the lever of mosquito-killer), then the mosquito-killer lamp start to work, and the lamp is full of purple light. It must turn off the light in the room while turning on the mosquito-killer), then the mosquito-killer lamp start to work, and the lamp is full of purple light. It must turn off the light in the room while turning on the mosquito-killer so as to achieve a better effect to kill mosquito.
4, It is a normal phenomenon that there is a cracking sound when mosquito and fly strike to the network after the mosquito-killer or the fly-killer lamp starting to work
5, Used for a time, see the following site lighting residues accumulate mosquitoes should promptly clean up, to clean up, to clean up, you must switch to off place, holding a screwdriver insulation, metal rod with a screwdriver between the two grid sections Network line contact for open circuit, discharge, and then unscrew by hand outside the net, remove the external net, right to clean nets.
6, Using white light illumination: Play the master switch on ON state, and play the auxiliary switch on white hight illumination state to start white light illumintaion
|Payment Terms:||LC / TT / LC / DP / DA / western union|
|Packing:||color box for each one|
|Lead Time:||10days after confirming|
|Standards Certificate:||CE / SASO|