Model: | CDMS100 |
---|---|
Brand: | SUN ISLAND |
Origin: | Made In China |
Category: | Metallurgy , Mining & Energy / New Energy / Solar Energy |
Label: | Separated Heater , Domestic Heater , Heat Pipes Heater |
Price: |
US $700
/ set
|
Min. Order: | 5 set |
Live Chat: | Last Online:03 Jul, 2014 |
PRODUCT FEATURE
1. Solar water heater with copper heat pipe
2. Special high quality Insulated material to reducing the heat loss rate
3. High quality heat pipe for efficient heat transferring and long life span of the solar water heater
4. Exquisite workmanship to guarantee the decent appearance
5. Certificate: CE, ISO9001:2008, TUV
6. Long life span and no extra cost after installation (Easy plug-in installation)
7. Easy operation
8. Cold resistance: -40 centigrade degree
9. Stagnation temperature: 300 centigrade degree
10. Anti-freeze (Anti-freezing), more suitable in cold areas, fast start-up on cloudy or rainy days. And realize the hot water availability regardless of time and weather. (Anti-freeze: Work good in cold climate, ≥-35°C)
11. Recirculation by controller
12. Corrosion resistant material (aluminum and copper)
13. OEM service
14. Tank is equipped with electric water heater setting, automatic temperature controller
(Back up with electric heater so that in the day without sunshine hot water can also be used. Or can be combined with gas or electric heater.)
15. with increased anode magnesium bar stick to prevent furring
16. The insulating layer uses polyurethane bulk bubble
17. It successfully carries out installation of separation according to fabricating yard
18. It is not easy to be frozen and cracked down even in hash weather.
19. The water in the indoor-water tank is under pressure and the system work with not water circulating pump.
20. If one vacuum tube is damaged, the whole machine can work normally, as no other part is influenced, replacement is convenient.
21. Warm keeper of water tank in the module is asbestos and polyurethanes frothed, thickness 50mm
22. 24 hours water supply on condition that pipeline is working ;( Workable at any time and enjoyable)
WORKING PRINCIPLE
1. When the temperature of heat collector reaches the set value, the controller will make the circulation pump work automatically.
2. The circulation pump makes heat-conducting liquid circulate automatically.
3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4. In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5. In case the temperature of the tank does not reach maximum temperature, then start the auxiliary heating device.
PRODUCT SPECIFICATIONS & DETAILS
Specifications:
Structure of Product: three parts
1. Heat pipe solar collectors
2. Pressurized water tank
3. Working Stations (Including controller, circulation pump, flowing meter, pressure gauge, safety valve, expansion vessel)
Part One: Heat pipe solar collector: |
|
1. Vacuum tube |
58/1800mm heat pipe three target |
2. Inner copper header |
0.8 mm thick red copper |
3. Collector channel |
Cu pipe (red copper) &thickness0.8mm |
4. Collector crust/ Outer shell |
1.6mm thick aluminum alloy |
5. Collectors |
58*1800mm heat pipe vacuum collector tubes (no water in tube) |
6. Insulation layer |
35 mm thick polyurethane foam |
7. Hail resistance |
25mm (diameter) |
8. Standards of heat pipe tubes |
10, 12, 15, 16, 18, 20, 24, 30, or 36 units. (Tube quantity is optional). |
9. Cold resistance |
-40 centigrade degree |
10. Stagnation temperature |
300 centigrade degree |
11. Bracket/Frame |
45 degree galvanized sheet,aluminum alloy or stainless steel &thickness 1.0mm ~1.8mm |
12. Installation angle |
0°-70°. |
13. Application |
Split pressurized solar collector system |
Part Two: Pressurized water tank: |
|
1. Inner tank material |
SUS304-2B or SUS316, thickness 1.0-2.0mm. |
2. Outer tank material |
color steel with anti-corrosion layer& 0.5mm or stainless steel. |
3. Heat exchanger in tank |
single coil |
4. Insulation layer of tank |
high density Imported Polyurethane overall foaming under over 25C &thickness 35mm~60mm |
5. Working pressure |
6 bar |
6. Testing pressure |
12bar |
7. Copper pipe |
OD 12mm, thickness 1.0mm |
8. No. of Copper coils |
double coils or single coil |
9. Low temperature resistance |
≧-40℃. |
10. Electric heater |
1.5-3kW. |
11. Water capacity |
100L/150L / 200L/250L / 300L/400L/500L/700L/800L/1000L |
12. The time of heat preservation |
72h - 80h |
13. Other accessories |
electric Immersion heater for backup, magnesium strick, P/T valve, one-direction safety valve. |
Part Three: Working Station Component: |
|
1 |
Operating screen |
2 |
Manometer |
3 |
Pump speed adjust switches |
4 |
Temperature difference circulation pumps |
5 |
Flow rate indicator |
6 |
Return circuit connector |
7 |
Safety valve |
8 |
Expansion vessel connector |
9 |
Return circuit connector |
10 |
wall mounting |
11 |
Expansion vessel: 5L, 8L, 12L, 19L, 20L, 24L |
12 |
Pressure resistance: 10 bar pressure for expansion vessel |
PACKING & CARTON DETAILS
Exporting standard carton or wooden boxes for sample.
Inner poly bag with outer export carton packing.
CONTACT US
If you are interested in our Products, welcome to contact us!