| Model: | LT810 |
|---|---|
| Brand: | NANHUA |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Lighting / Emergency Light & Indicator Light |
| Label: | solar light tower , led strobe light , obstruction light |
| Price: |
-
|
| Min. Order: | - |
| Live Chat: | Last Online:01 Nov, 2017 |
Applications
Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM,Smokestacks, Buildings and any other potentially hazardous obstructions for air traffic with a steady burning red or flash safety light.
Main functions and features
• Extremely Reliable- Major Maintenance Cost Saving.
• Use NiMH battery, easy to replace.
• Lamp housing-Polycarbonate, with bird spike, with good anti-impact strength, thermal stability, high transmittance.
• Combustibility rating：UL94-V0.
Specification
|
International standard |
ICAO(Annex 14) low intensity aviation light and FAA-L810 |
||
|
Light source |
LED |
Vertical degree |
≥10° |
|
Light color |
Red |
Horizontal degree |
360° |
|
Intensity |
>32.5cd |
Flash rate |
20, 30 or 40 times/min(adjustable)，Factory setting 30/min |
|
LED life |
≥100.000h |
On/off level |
70/100Lux |
|
Battery capacity |
3.6V/8AH NiMH |
Solar panel |
4W/5V |
|
Autonomy |
7 days (at 25℃, if the ambient temperature is lower than 0℃ or above 40℃, it will affect the battery discharge) |
||
|
|
|||
|
Operating temperature |
-40℃~+55℃ |
IP protection |
IP65 |
|
Relative humidity |
10%~95% |
Weight |
5Kg |
|
Material |
Base：Die casting aluminum Housing：PC |
||
Installation and operation
• Mount the solar light in the most suitable place such as under direct sunlight, to ensure its continuous operation.
• Use 3 M8 screws to fasten to the mounting surface, and the surface should leveling and with enough mechanical strength.
• If operate the light for the first time, open the battery button on the bottom of light base.
• As the light has built in photocell, in case the light beam is very strong, the light will not work, when test the light, put the light in dark place.
Flashing rate adjustment
• Unscrew the fixing 6 screws.
• Disconnect the battery connection, take off the housing.
• Adjust the red switch on PCB board, and adjust the flashing rate.
