Home > Products > Electronics & Electricity > Electronic Components > Other Electronic Components

DSIC series DIP Switch
STANDARD SPECIFICATION
1.Ratings
1.1 Mechanical Life：3000cycles minimum
1.2 Comtact Rating ：100mA at 50Vdc Non-switching,25mA at 24Vdc，10mA
at 50Vdc Switching
1.3 Contact Resistance ：
50mohms maximum（initia）
100mohms maximum（after life）
1.4 Insuiation Resistance：
1000MΩ Minimum at 500vdc between adjacent closed contacts and also
across open switch contacts.
1.5 Dielectric Strength:500vac,RMS,minimum voltage measured between
between adjacent closed contacts and also across open switch contacts
1.6 Switch Capacitance：5pf at 1 mhz.
1.7 Operating Temperature：-30℃ to+ 85℃
1.8 Storage Temperature：-40℃ to +85℃
1.9 Test Condition：The standard test shall be 5～35℃ temperature and
45～85％ relative humidity 860～1060Hpa atmospheric pressure unless otherwise
specified ln case of any question happen retest condition shall specify by
temperature 20±2℃,65±5％RH and 860～1060Hpa
2.Materials and Finishes ：
2.1 Finished code：
G:Full Gold Plated(Contact area & terminal with gold-plated)
S:Contact-Gold plated with Terminal Tin-plated
2.2 Plated code
E:3u"Gold-Plated
F:10u"Gold-Plated
A:12u"Gold-Plated
B:20u"Gold-Plated
G:30u"Gold-Plated
2.3 Base：UL 94 VO grade Thermoplastic/black color
2.4 Cover：UL 94 VO grade Thermoplastic/black color
2.5 Actuator：UL 94 VO grade Thermoplastic/Whit color
3.Processing：
3.1：switch operation and taping
3.1-1 Use tweezers or ball point pen for operation
3.1-2 flux cleaning should be done without removing the tape
3.1-3 if the tape is removed，it adhered less than before when it is
placed back on，possibly causing flux inflow.
3.1-4 Sealed switches withstand aqueous，detergent and isopropyl
alcohol washing