Home > Products > Chemicals > Organic Chemical Materials > Organic Acid

Lean Duplex 2304 Din 1.4362 Sheet Plate 1
  • Lean Duplex 2304 Din 1.4362 Sheet Plate 1

Lean Duplex 2304 Din 1.4362 Sheet Plate

Model:Duplex 2304
Brand:Lean Duplex 2304 Din 1.4362 Sheet Plate
Origin:Made In Italy
Category:Chemicals / Organic Chemical Materials / Organic Acid
Label:Duplex 2304 Plate , Din 1.4362 Plate , UNS S32304 Plate
Price: -
Min. Order:-
Inquire Now Add to Basket

Member Information



Biz MemberIndia
Live Chat:Last Online:17 Dec, 2018

Product Description

Lean Duplex 2304 Din 1.4362 Sheet Plate 

We are Stockholder & Distributors of Lean Duplex 2304 Din 1.4362 UNS S32304, LDX 2101 Din 1.4162 UNS S32101, 2101-LDX Lean Duplex, DX2202 Din 1.4062, UNS S32202, Lean Duplex 2202 Sheet, Plate, Strip, Coils, Wire, Rods, Bars, Round Bar, Nuts, Bolts, Fasteners


Lean Duplex 2304 in Sheets, Plates, Rod, Bar

SPECIFICATIONS: GRADE Lean Duplex | UNS S32304 | ASTM/ASME A240 | Werkstoff 1.4362

Lean duplex 2304 is a 23‰ Cr, 4‰ Nickel, Mo free duplex stainless steel (23.04). We hold stock of duplex alloys in plate, sheet, and bar from our warehouse in the UK. We often meet specialist alloy profiling requirements and are a global supplier.

The alloy lean duplex 2304 has similar corrosion resistance properties to 316L. Furthermore, its mechanical properties i.e. yield strength, are twice those of 304/316 austenitic grades. This allows the designer to save weight, particularly for properly designed pressure vessel applications.

The alloy is particularly suitable for applications covering the -50°C/+300°C (-58°F/572°F) temperature range. Lower temperatures may also be considered, but need some restrictions, particularly for welded structures.

With its duplex microstructure, low nickel and high chromium contents, the alloy has improved stress corrosion resistance properties compared to 304 and 316 austenitic grades.


General Properties

Duplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless steel whose structure is a balance of ferritic and austenitic. It has general corrosion resistance similar or better than Alloys 304L and 316L but with yield strength nearly double that of austenitic stainless steels. Its duplex microstructure and low nickel and high chromium contents also allows Duplex 2304 to demonstrate improved stress corrosion resistant properties compared to 304 and 316. It is typically suitable for all applications in the -58oF to 572oF (-50oC to 300oC) temperature range and is designed to feature high mechanical strength, good weldability, good corrosion resistance, high resistance to stress corrosion cracking, good machinability, low thermal expansion, good fatigue properties, high thermal conductivity, and easy fabrication.

Specifications: UNS S32304


Duplex 2304 is generally used in the same applications in which Alloys 304 and 316L are used. Some examples of these applications include:

  • Chloride containing environments
  • Welded pipe systems within the Pulp and Paper, Chemical and Petrochemical, and Water Treatment industries
  • Transportations
  • Heat exchanger tubes
  • Architecture, building, construction
  • Pressure vessels
  • Caustic solutions, organic acids
  • Food industry


  • ASTM/ASME: UNS S32304
  • EURONORM: FeMi35Cr20Cu4Mo2
  • DIN: 2.4660



Pulp and paper industry, caustic solutions, organic acids, food industry, pressure vessels.

Duplex 2304 Description

Duplex Alloy 2304 is a two-phase, ferritic, austenitic 23% chromium, 4% nickel, molybdenum-free duplex stainless steel. It has similar corrosion resistance properties to 316L. Furthemore, its mechanical properties are twice those of 304L/316L austenitic grades. This allows the designer to save weight, particularly for properly designed pressure vessel applications. The alloy is partcularly suitable for applications covering the -50°C/+300°C temperature range.


Carbon: 0.03 max
Manganese: 2.50 max
Phosphorus: 0.040 max
Sulfur: 0.030 max
Silicon: 1.00 max
Chromium: 21.50 - 24.50
Nickel: 2.00 - 5.50
Copper: 0.05 - 0.60
Molybdenum: 0.05 - 0.60
Nitrogen: 0.05 - 0.20

Iron: Balance

Physical Properties

Density: 0.284 lbs/in3, 7.86 g/cm3


Thermal Conductivity: BTU-ft/hr/ft2/°F (W/m-°K)

At 68-212ºF (20-100ºC)- 9.0 (17.0)


Mean Coefficient of Thermal Expansion: in/in/°F (μm/m•K)

32- 212°F 6.97 x 10-6 (13.0)


Modulus of Elasticity: ksi (MPa)
29.0x 103 (200 x 103) in tension


Magnetic Permeability: Ferromagnetic


Melting Point: 2570/2660°F (1410/1460°C)


Coil - Strip, Foil, Ribbon
Wire - Profile, Round, Flat, Square

Mechanical Properties at Room Temperature

Annealed Nominal
Ultimate Tensile Strength: 110 KSI min (758 MPa min)
Yield Strength: (0.2% offset) 65 KSI min (448 MPa min)
Elongation: 30% min

Mechanical Properties
2304 can be cold rolled to various tempers. Contact Ulbrich Technical Service for additional information

Additional Properties

Corrosion Resistance
Refer to NACE ( National Association of Corrosion Engineers) forrecommendations


#1 – Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
# 2D – Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process.
# 2B –Smooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D.
#BA Bright annealed cold rolled and bright annealed
#CBA Course bright annealed cold rolled matte finish and bright anneal
#2 Cold Rolled
# 2BA – Smooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part.
Polished - Various grit finish for specific polish finished requirements


Wire Finishes


XC-Extra clean. Bright annealed or bright annealed and cold rolled

Grease-Ultra bright finish for decorative applicatios

Soap-Soap is not removed from tempered wire to act as a lubricant.


Heat Treatment

2304 Cannot be hardened by heat treatment


For best results refer to: SSINA's "Welding of Stainless Steels and Other Joining Methods"


Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3, NADCAP Certified in accordance with SAE Aerospace Standards  

If you have any requirement of above items, please feel free to contact us  



MOBILE No. 0091- 9820292499  

( High Nickel Alloy & Super Alloy Materials )  
MUMBAI - 400002, INDIA.   
TEL.No. 0091-22-23858802   
TEL.No. 0091-22-23823963   
FAX No. 0091-22-23898724   
email - 
website : www.rolexalloys.com  


GENERAL SALES - sales@rolexalloys.com   
RECRUITMENT - career@rolexalloys.com   



Product Image

Lean Duplex 2304 Din 1.4362 Sheet Plate 1
Img 1

Send Inquiry to this Member


57-A, Khatargalli, Thakurdwar, Mumbai-400002, India

Mukesh Shah (Director)
0091- 9820292499
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here.

China Suppliers Quick Searching:

Organic Acid Made In China Products


Organic Acid China Suppliers and China Manufacturers