Home > Products > Industrial Supplies > Other Industrial Supplies

Smart Temperature and Pressure Compensation Steam Vortex Flow Meter



Introduction:

The series of Vortex Flowmeter is based on Carmen Vortex Principle, which adopts piezoelectric crystal as testing components. It is a new kind of stress detecting vortex flowmeter. It has the advantages of wide range rate, high accuracy, low pressure loss, good medium generality, pulse signal output proportional to flow, convenient to connect with computer etc. The detector probe of sensor and the vortex generating body are installed separately, and the high temperature resistant piezoelectric crystal doesn't contact with medium, so the instrument is simple structure, good generality, and high stability.



The Vortex Flowmeter sensor can be used to detect and measure the flow of all kinds of gas, fluid and steam.



Technical Parameters:

Measured medium: All kinds of gas, fluid and steam

Nominal diameter: 15-500mm (Integrated-type) 300-2200mm (Insertion type)

Operating environment:

Environment temperature: -20° C-60° C

Liquid temperature: -40° C -250° C (Max 350° C)

Relative humidity: 5%~90%

Nominal Pressure: 1.6Mpa 2.5Mpa 4.0Mpa

Measurement Range: Gas and steam: (5-70)m/s fluid: (0.5-7) m/s

Measurement Accuracy: ± 1% ± 1.5%

Output Signal: (4-20mA)+Pulse

Safety Protection: IP65

Explosion-proof level: Exd II CT1-6

Power Supply: DC24V

KAIFENG WATER LARGE FLOW MEASUREMENT SCIENCE & TECHNOLOGY CO.,  LTD. is located in Kaifeng, Henan. The factory covers an area of 33,300 square meters and has a total construction area of 26,640 square meters. It is a technology-based intelligent instrumentation and control equipment manufacturer. Water is committed to providing customers with highly reliable measurement instrumentation and control solutions!
 
The company has established a test management system in accordance with ISO/IEC 17025:2005 “General Requirements for Testing and Calibration Laboratory Capabilities” (CNAS-CL01 “Test and Calibration Laboratory Capability Approval Guidelines”).
 
The company's main products are electromagnetic flowmeter, vortex flowmeter, turbine flowmeter, oval gear flowmeter, ultrasonic flowmeter, mass flowmeter, liquid level flowmeter, various liquid level gauges and converters, and ball valve, gate valve, check valve, globe valve, etc. Our company's products are characterized by high precision, high stability and easy installation.
 
In the past many years, our company has provided advanced and reliable instrumentation and valves for national and international key projects of petroleum, chemical, petrochemical, metallurgy, light industry, urban water supply and drainage municipal construction, aerospace, nuclear power and other industries.  www.waterlarge.com