Home > Products > Electronics & Electricity > Electronic Instrument > Physical Measuring Meter

HIGH ACCURACY ULTRASONIC THICKNESS GAUGE

The ultrasonic thickness gauge Model SW6 series are high accuracy gauge, suitable for the high accuracy thickness measuring requirement of all kinds of materials, they are widely used in the field of steel, cast iron, aluminum, red copper, zinc, quartz glass, polyethylene, PVC, gray cast iron and nodular cast iron. The gauge can fast and precisely measure the thickness of measured object so long as putting the probe on the surface of one side of measured object.

The SW6 series offers various practical measurement features, its high cost-performance ratio makes it is your ideal selection. such as Automatic Probe Recognition that recognizes transducer types, Field Calibration of all materials. Sound velocity range 509 up to 18699m/s, it makes the gauge is the requirement of most materials; Large data storage up to 2000 readings memory; Data output to PC; 4 digit LCD display with settings ; Backlight display for dark environment and adjustable.

hickness Measurement Range:
0.65 ~400mm(Steel), 
0.3~200mm(Glass)
4~80mm(High temperature), 3~50mm(Gray Iron)
Notes: Thickness range depends on material transducer type, surface condition and temperature.
Material Velocity Range:
509~18699m/s
Measuring Accuracy
±0.05mm 
Display Accuracy: 
0.01mm / 0.1mm
Scanning Rate:
2~20 times/sec.
Scan Velocity: 
2times/s～20times/s 
Frequency Bandwidths: 
1～10MHz
Measuring lower limit of pipes: 
(Depend on the probe)
Φ15mm×1.0mm (Probe: 5MHz, Φ10mm)
Φ10mm×1.2mm (Probe: 7.5MHz, Φ6mm)
Display Mode:
128×64 matrix LED
Power supply:
2  AA  Alkaline Batteries 
Operating Time: 
280 hours typical battery life,
100 hours continuous with backlight on
Operating Temperature Range: 
-10℃～50℃(Ambient Environment)
-10℃～300℃(High Temperature Mode)
Gage Size:
136 mm×72 mm×20mm
Gage Weight: 
176g（Including Batteries）