Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Satellite Equipment

1) Tuner: DVB-S
2) Colored display screen 
3) can input hard disk
4) 400 MHZ MIPS

colored OLED - Display

MPEG-2 / H.264 Hardware decoding

Tuner: DVB-S, optional: DVB-C, DVB-T

Tuner Module, Plug&Play

2 x Smartcard-Reader (Dreamcrypt CA)

Mini USB for Service and software update

10/100Mbit Ethernet Interface

1 x Scart (RGB, FBAS or S-Video)

HDMI

2 x USB 2.0 

PDIF Interface for digital bit stream out (AC-3)

64 MByte Flash, 256 MByte RAM

SATA

- for internal HDD 2,5

unlimited channel lists for TV/Radio

channel-change time < 1 second

automatic service scan

directly bouquet-lists

EPG (electronic program guide)

multiple LNB-Switching control (supports DiSEqC)

OSD in many languages and skin-support

Videotext Decoder

extern 12V power supply

DVB receiver 800 HD se technical data

DBS-Tuner mit DVB-S2:

Frequency Range 950 .... 2150 MHz

Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)

Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC

DVB-S2: 10 ? 31 Mbaud/s (8PSK) , 10 ?30 Mbaud/s (QPSK)

Video decoder:

Video Compression MPEG-2 and MPEG-1 compatible, H.264

Video Formats 4:3 / 16:9

Letterbox for 4:3 TV-Device

Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3

Audio Mode Dual (main/sub), Stereo

Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output Level L/R 0,5 Vss on 600 Ohm

THD > 60 dB (1 kHz)

Crosstalk < -65 dB

Output Level 0,5 Vss on 75 Ohm

Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz

S/PDIF-Output optical, Toslink

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm

Teletext filter in conformity with ETS 300 472 Standard

Output: FBAS, RGB, S-Video

Mini USB service connector:

Function: Update of Firmware

Ethernet:

10/100 MBit compatible interface

Function: Update of Firmware

Analoge modem:

analoge modem for Internet connection

SATA Interface:

for internal 2,5" HDD

2 x USB 2.0

LNB power and polarisation per tuner:

LNB Current 500mA max.; short-circuit-protected

LNB Voltage vertical < 14V no load, > 11,5V at 400mA

LNB Voltage horizontal < 20V no load, > 17,3V at 400mA

Count of active satellite position:

DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:

< 15W at 12V

External PSU

Input:

110-240V AC / 50-60Hz / 0,6A

Output:

12V = / 3,0A