Home > Products > Industrial Supplies > Rubber & Plastics Machine

AU-75/28:1 type door sealing gasket production line

1. Specification:

2. Warranty:

1) All electrical parts warranty period is six months.

2) All mechanical parts warranty period is one year.

3) Detailed warranty policy refer to appendix.

4) ISO 9001:2008 international Quality system certificate, ISO 14001 management system and other quality certificates inspection reports are available.

Application: refrigerator door gasket, water dispenser, disinfection cabinet, door and windows sealing gasket, automobile sealing and so on.

1. The refrigerator door seal production line configuration as below:

1. Automatic feeding extruder and automatic drying machine

Reducer: hardened material 38CROMAL，carburizing touch tooth treatment, Maximum power 50KW,speed ratio of 28:a roughness of 0.08.

Main DriveMotor: 18.5KW AC motor.

Cooling system: the barrel with five automatic air-cooled fan and the cutting area with circulation water cooling. The power of fan is 160W/unit.

Heating system: the body is using five parts electric heating, power is 2KW per part. And the head part is 3KW. Total power of heating system is 30KW.

Temperature control system: Top brand CHINT thermometer and good quality of low voltage electric parts.

Variable frequency speed controller: Top brands

1. Screen Changers

1.  Cooling system with double layer stainless steel water tank

1. Automatic traction cutting machine: Variable frequency speed controlled, synchronous drive with timing belt, screw adjustment both up and down.

1.  Fully automatic 45-degree angle cutting system:

1.  Drilling machine

Automatically punch the door seals to facilitate the welding of the back door seal box exhaust to maintain good flexibility.

1. Traction conveyor

OMRON servo motor, belt driving, the upper and lower pressure can be adjusted, Controlled by photoelectric and fiber and the encoder.

1. 45-degree Notching Machines

Automatically cut 45° angle to both ends of the door seals as setting. The Precision is ±1MM.

1. Automatic reclaimer:

The profile after cutting picked up by mechanic arm and placed in the box on the placing machine.