Home > Products > Industrial Supplies > Machinery > Cleaning Machine

1. Summary of equipment

This equipment is used for cleaning substrate by washing, spray, air knife and for removing moisture by IR,UV. so as to improve the wettability of the substrate surface,cooling the substrate temperature by subsequent TBL into the COAT device.

Feeder, TBL, blanker and other equipment, according to customer's line body, printing equipment and other specific circumstances.

2.Specifications

(1) the processing object: a glass plate for STN LCD

(2) treatment objective: cleaning, drying

(3) the object size: 14 "x 16", 17 ", 0.55, T=0.4, 0.7,1.1mm

(4) basket specification: as per your company

(5) substrate transfer direction: from left to right, or from right to left

(6) the size of the equipment: about 10450 x 1400 x 1650mm

(7) dry weight: about 5200Kg

(8) substrate transfer height from the ground to the  substrate is 900mm

(9) transfer mode: the level of gold leaf type transmission mode

(10) spacing of the transport roller : 80mm

(11) the processing time: Standard 17 seconds / block standard transmission speed of about 2.1m/ minutes

(12) the start time: about 60 minutes after  start 

3.Power required

(1) the host: 3P, 380V, 50Hz, 130kWA

(2) total: about 130kWA

(3) the pure water consumption: about 32L/min, 0.15MpaG, resistor value is more than 10MΩ/cm

(4) the cooling water amount: about 12L/min, 0.15MpaG without back pressure, about 17 ℃

(5) the air amount: about 4200NL/min, 0.4 ~ 0.5Mpa G,clean and dry gas