Home > Products > Electronics & Electricity > Transducer

SCY6 Series Hall Split Core Open Loop Current Sensor Ipn 100AT~500AT

(Open Loop Current Sensor, Split core)

NET WEIGHT:68.5G

PACKING: 2SET/CARTON BOX

Technical Parameters (Ta=25°C)
Model SCY6: 100A, 200A, 300A, 500A
Nominal Rms Current (Ipn) : ±100AT, ±200AT, ±300AT, ±500AT
Measuring Range (Ipm): 300AT, 600AT, 750AT, 1000AT
Load resistance Rmax: 10kΩ
Supply Voltage: ±4V or ±5V
Working voltage: DC ±12V~±15V(±5%)
 
Dynamic Performance Data:
Accuracy:±1% FS
Linearity: ±1% FS
Withstand voltage: 2.5kVrms/50Hz/min
Offset Voltage: < ±30mV <±15mV
Offset temperature: < ±0.1%/°C <±0.05%
Thermal drift of Vo: < ±2mV/°C < ±1mV/°C
Hysteresis offset: <30mV < 20mV (if=F.S. 0<--- --->Nominal RMS Current)
Response time: < 5uS
Current consumption: <±15mA
 
General Data:
Operating temperature: -20~+80 °C
Storage temperature: -40~+85 °C
 
Remark:
1. SCY6 Series 's up and down can open and close without removing the busbar line, easy to install (Split type current sensor)
2. Based on open-loop principle, it can measure DC, AC and Pulse current.
3. Square perforation, mainly measure wire conductor current.
4. Features: High accuracy, low power consumption, high liability and strong overload capacity.
 

SCY6 Series Hall Split Core Open Loop Current Sensor is a new generation open loop current sensor based on Hall effect, it can accurately measure DC, AC and pulse current and other various irregular waveforms current in electrical isolation conditions. Perforations in the form of a round hole type, use for cable connections, it is widely used in inverter, all kinds of power supply, DC panel and Welding machines and other equipments. Potting by imported resin, product has excellent thermal conductivity and scalability.
High-performance core result minimal residual magnetism, all electronic is imported components assembled. Excellent circuit design, all products is processed via 48 hours room temperature aging and eight hours high temperature aging, and by rigorous factory testing, it has excellent characteristics with long-term stable operation even in harsh working conditions. Good function in temperature compensation. It is trust and recognition by domestic and foreign customers.