| Model: | AUTO-ZY |
|---|---|
| Brand: | Autostrong |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Laboratory Instrument |
| Label: | Needle Flame Test , Needle Burner , Flame tester |
| Price: |
US $3480
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:13 Sep, 2016 |
High Quality Needle Flame Tester refer to IEC60695&UL746A Standard:
1.Reference standard:IEC60695-2-10&UL746A
2.WIth CE,ROHs,SGS,ISO certificates
1.Introduction:
Needle FlameTesting device reference to IEC60695-11-5 UL746A , GB/T5169.5-2008, GB4706.1-2005..
2. Technical parameters:
|
Needle burner |
inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel |
|
Burner angle |
0,°20°, 45° (adjust flame height) |
|
Thermocouple |
Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C |
|
Burning time |
0-999.9 s ± 0.1 s adjustable (usually selected for 30s) |
|
Hold Burning time |
0-999.9 s ± 0.1 s, automatic recording, manual timeout |
|
Flame Height |
12mm ± 1mm (with height measurement instruments) |
|
Flame Gas |
butane gas/Butane gas, min. 95% purity (can use bottled lighter gases) |
|
Temperature Test Range |
0~1000°C |
|
Flame Temperature Requirements |
from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds |
|
Standard Copper Block |
4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP |
|
Test process |
automatic control, independent convulsions |
|
Chamber |
≥0.5m3 |
|
Size |
W1100mm×D700mm×H1300mm, exhaust hole Ø100mm |
|
Control |
Using single chip microcomputer + touch screen control |
|
Consult standard |
GB/T5169.10-2006 , IEC60695-2-10:2000,UL746A |
|
Power Supply |
800VA ,220V, 48-60Hz |
|
Display panel language |
All English |
3.Package: 1piece per wooden case
| Payment Terms: | L/C,T/T,Western Union,Paypal and Escrow |
|---|---|
