Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

DMX512 Strip Light

---Shenzhen HuaCanXing Technology CO.,LTD.

Product Information

Name

DMX512_RGB full-color light

Size

L(1000mm)×D(30mm)

Tube Material

Plastic

Power

23W(full bright)

Apply

LED display, LED strip screen

Type

LED decoration light

Color

Full-color

Input Voltage

12V

Product Advantages

1. Standard DMX512 protocol, full-color, RGB

2. Addressing mode: connect with bus line or connect in parallel

3. All light connected in parallel, the broken light can not impact other lights.

4. Data transmitted stability, high anti-interference capability

5. Adopt import LED chips. The 485 chips support 256 nodes.

6. Use heat integration and streamlined design, anodic oxidation treatment on surface of light

Addressing method

Use H805SB to address for DMX512 strip light. The RS485 chip must be welded on PCB of H805SB.

Connection methods: connect the signal line of DMX512 strip light to the corresponding signal line of H805SB: GND connect GND, D- connect D-, D+ connect D+.

 Electrify H805SB and strip light, press "function" button on remote control to enter the DMX address setting mode, press the number key and then press "confirm" to address for the corresponding connected single strip light.

 If there are multiple lights connected in parallel, firstly, you need to select and then address for the selected lights: press the number key, then press “choose”,the corresponding light will be lit up; Press a new number key, and then press “confirm” to enter a new address for strip light. For those lamps thatare not addressed after leaving factory, the address is 0 and read the same channel data with the lamps that address is 1.If multiple lights have the same address, after pressing “choose”, the lights will be lit up together and then you need to press “white-” until one lit lamp is left, then you can address for the light. The times number of pressing “white-” is less than 16. If the lamps are all off, press “white+”.

After addressing, you can press “select play” to check if the address is correct. The lights that the address is beyond 300 are off.

The address ranges from 1 to 512.

Summary

Distance between lights can be up to 1200 meters, which is suitable for occasion of square, hotel, KTV, pub and so on. The color has effect of red, yellow, blue, green, white and colorful change. Support external control system. Combine colorful light with music to bring you into dreamy space.