Home > Products > Industrial Supplies > Construction Machine

sclisa01@yahoo.com
We supply all spare parts of hydraulic hammer :
Tool, Chisel, Through Bolt, Lower Chuck Bushing, Centering Bushing, Shank Bushing, Piston, Chuck housing, Cylinder, Valve, Seal Kit, Diaphragm, Wear Plates, Side Bolt, Accumulator Body, Front head, chisel holder, strike piston, tie rod

For brands of hyraulic hammer: ALLIED (KRUPP), ARROWHEAD, ATLAS COPCO, BOBCAT, D&A, DAEMO, DNB, FINE, FURUKAWA (KENT), HANWOO (RHINO), HYDRO KAHN, INDECO,  KOMAC, KRUPP (ALLIED), MONTABERT (TRAMAC), 

MSB, NPK, OKADA, RAMMER, RHINO (HANWOO), SEBA, SOOSAN, TOPA, TOYO
, TRAMAC (MONTABERT) etc.

TOOL'S FEATURES:
1. Material: SCR440 or SCM440
2. Dimension: Depending on the specification of Tool Maker
3. Chisel type: Moil Point, Blunt Tool, Flat, wedge
4. Heat Treatment: 
Austenting Temperature 810~850 (20min/inch) 
Cooling Water oil cooling 
Tempering 250~300 (1hr/inch) 
 
5. Mechanical Properties: 
Surface Hardness HRC51± 3 
Core Hardness HRC35± 3 
Tensile strength(min) 1250N/mm² 
Yield point (min) 950N/mm² 
Elongation 10~14% 
Reduction of Area 35~40% 
Impact work 23~28 ft1b 
Grain size 7.0~8.0