Model: | LY-L03S001-017 |
---|---|
Brand: | Leadyo |
Origin: | Made In China |
Category: | Electronics & Electricity / Battery, Storage Battery & Charger |
Label: | batery pack , pcm , battery bms |
Price: |
-
|
Min. Order: | 5 pc |
Live Chat: | Last Online:26 Mar, 2014 |
smart li-polymer battery pack 11.1v battery pack 10Ah BMS
Cell Types : li-polymer battery pack , 11.1V,10Ah.(Customized )
1. Battery Struction: 3S1P
2.Accept customized
3..PCM protection
4.High capacity
Application : Golf carts, Portable Instrument ,Electric wheelchair,power tools ,medical equipment,ebike, handset/pos, power bank, and all kinds of equipments etc.
Specifications:
9059156/3S1P Li-polymer Battery Pack 11.1V/10AH | |||
Model:LY-L03S001-017 | |||
Item | Specification | Remark | |
Nominal capacity | 10000mAh | 0.5C discharge Cell: 9059156 | |
Nominal voltage | 11.1V | 3.7V / 1Cell | |
Charging voltage | 12.6V±0.05V | 4.2V / 1Cell | |
Charging method | CC/CV | (Constant-current and -Voltage with Limited current | |
Standard charging time | 3000mA/3.5hour,5000mA/2.5hour | Battery capacity÷charging current×1.5 | |
charging current | 5000mA(0.5C) | 0 ~ +40°C | |
Maximum charging current | 10000mA(1C) | 0 ~ +40°C | |
Continuous discharge current | 10000mA(1C) | -20 ~ +60°C | |
Discharge cutoff voltage | 7.2V | 2.4V / 1Cell | |
Short circuit protection | Exterior short circuit | Automatic recovery | |
Internal resistance | ≤200mΩ | AC Impedance 1kHz | |
Cycle life | ≥500 | ||
Operating temperature | Standard Charge | 0 ~ +40°C | |
Standard Discharge | -20 ~ +60°C | ||
Outline dimension | L160*W60*H30mm | Length x wide x height | |
Pre-wired | Red = Positive,Black = Negative | ||
BMS Specifications: Protection Circuit Module:PCM-B03S10-187 |
|||
Maximal continuous charging current | 10A | ||
Maximal continuous Discharging current | 10A | ||
Over-charge detection voltage | 4.35V±0.025V | single cell | |
Over-charge release voltage | 4.15V±0.05V | single cell | |
Over-charge detection delay time | 0.5S—1.5S | single cell | |
Over-discharge detection voltage | 2.40V±0.08V | single cell | |
Over-discharge release Voltage | 3.0±0.10V | single cell | |
Over-discharge detection delay time | 50—150mS | single cell | |
Over-current detection | 30±5A | can adjust | |
Over-current delay time | 5—15mS |
|