Home > Products > Industrial Supplies > Construction Machine

Custom processing: it is type: cement machinery molding cycle: 15 (in seconds)

Vibration frequency: 1400 maximum pressure (times/min) : 200 (KN) overall weight: 4.5 (t)

Vibration frequency: (50 hz) shape size: 3700 * 1500 * 2600 (cm) capacity: 29.4 (kw)

The molding pressure: 200 (t) brand: win the card type: QT4-15 a

Alias: block brick making machine use: mainly produces cement brick, wall brick, brick road

USES and features

1, the storage hopper separate and quantitative feeding hopper and supply:

The traditional molding machine, concrete storage and supply for the same hopper and achieve near vibration source, easily affected by the residual vibration, make some concrete liquefied ahead of time, extending time and increase the difficulty of feeding, and the intensity of products error is large, QT4-18 block the use of the hopper and hopper for separate, hopper (about 500 liters) away from the source of vibration and vibration isolation measures, and through the enclosed quantitative feeding belt to for hopper, quantitative switch control for the hopper online (how many materials can be adjusted).

2, forced feeding device:

For concrete porous brick rib thickness thinner (generally in 13 to 16 mm) traditional way of feeding the material evenly hard to join in. QT4-18 block molding machine adopt compulsory feed system in cloth with multiple rows in the stirring fork (), when the cloth box sent to the mould box above, the stirring fork oscillating feeding on the molding box, ensure charging both speed and can make the mold box feeding evenly.

3, excellent vibration system:

QT4-18 block molding machine Lord vibration system is made up of vibrating motor and vibration box to the vibration of the frequency modulation system (variable frequency modulation can replace the pulley), with special additional pressure head vertical directional vibrator, shall constitute a complex vibration. Molding machine work, ejection cylinder lock on the vibration table, do a vibration mode, and the main vibration frequency modulation and the pressure head vibration, both to ensure the different performance of mixture formation, and the different specifications of the products in a shorter time fully dense, high efficiency, low energy consumption.

Fourth, intelligent control

Affected by material dry humidity, aggregate changes after mixing concrete material is not the same, on the premise of guarantee the quality of products, set the products the best molding parameters and the most conservative molding parameters, is higher than the upper limit automatically reduce charging, below the lower limit of the automatic feeding, this machine also has the real-time dynamic display mechanical action, fault inspection, input, output, fault location, and other functions.

Five, effective work mesa

Due to the design adopted the new technology of vibration, the vibration molding area can achieve effective nearly 0.5 m2 (850 x 550 mm). As the concrete porous brick, scale production pad set a solid foundation.

More than six, functionality,

Multi-usage, replacement of mold to produce various specifications of the wall block and brick road slope protection brick, square brick, planting grass, beautiful brick, brick and tile, roofing insulation brick, etc., one hand can fully meet the demand of various blocks on the market.

Machine maintenance maintenance

One, should be inspected carefully before they are using the machine all fasteners are loose; The lubrication part should lubrication as required.

Second, check whether the machine control system is normal? Limit switches and control component failure?

Three, check the bottom size, not eligible are not allowed to be used, lest jam damage the machine.

Four, after each shift production to mould box, pressure head and other parts of the machine on the residual concrete clean.

Five, the appearance of all components in the system as far as possible to keep clean (no putty accumulation) the outer surface of the tank should be cleaned on a regular basis.

Sixth, adhere to the daily maintenance and regular maintenance.

Maintenance: maintenance: 1. The shift to inspect the equipment parts, before starting the handover good lubricating by the regulation, add grease, application Settings. 2. Maintenance: use process in strict accordance with the operation procedures using machines, observe its operation situation, found that exception to stop processing in a timely manner. 3. After the maintenance: to make full use of time, get everything within the scope of the cleaning operation.

Regular maintenance: 1. Remove the set of components, lid and fence etc, thoroughly clean, wipe the equipment inside and outside. 2. Parts clearance adjustment, tighten loose parts, check the wear parts, replacement of individual parts. 3. Check the oil, circuit, water; Regularly clean the guide rail and sliding guide rod parts, deburring and scratches.

Seven, abide by the concrete block machine operation and maintenance system of the four requirements:

The main technical parameters

Every mould blocks 390 x 190 x 190 x 4 / die

240 x 115 x 90 x 12 / die

240 x 115 x 53 x 26 / die

Plate size 900 x 550 x 30 mm (wood)

Molding cycle 15-20 s (depending on the block size and the nature of the mixture)

Vibration frequency (adjustable) 70 hz (Max

The excitation (adjustable) 50 kn (Max)

Total power 29.4 kw

Dilettante size 3700 * 1500 * 1500 mm

1, electrical system adopts the imported color touch screen and programmable controller PLC control equipped with data input and output devices, including the safety logic control system

Logic control and fault diagnosis system.

2, imported hydraulic components and seal, high dynamic performance proportional valve, can be adjusted according to the requirements of the different work oil amount and pressure, to extract

Control of key parts of action.

3, the body with high precision, high strength castings and special welding technology and materials manufacturing, good rigidity, vibration resistance, long service life.

4, the machine USES four rod guide way, ensure the accuracy of the pressure head and die movement.

5, the machine USES mesa vibration extrusion forming, with reciprocating guide feeding device, the molding cycle is short, high production efficiency, block close-grained strong quality

Degree is high, the accurate size.

6, by using the combined technology of machine, electricity, liquid integration, make the equipment operation each cycle is consistent, thus forming products high stability,

The rejection rate is low.

7, one machine through to replace more mold to produce various specifications of porous brick, hollow block, kerbstone, pavement brick and tree planting grass brick, slope protection brick

Such as cement products.

8, with fabric device to produce color pavement brick, etc.