DuPont™ Delrin®
acetal resin
PRODUCT AND PROPERTY GUIDE
General Description
DuPont™ Delrin® acetal resin, the world’s first acetal polymer,
is a highly versatile engineering polymer. It offers an excellent
balance of desirable properties that bridges the gap between
metals and ordinary plastics. Since its introduction in 1960, it
has been widely used around the world in many applications,
such as the automotive, industrial, electronic, and consumer
goods industries. Delrin® has gained widespread recognition
for its reliability and performance in thousands of engineering
components all over the world. Delrin® is the DuPont registered
trademark for its brand of acetal resin also commonly referred
to as polyoxymethylene (POM).
Properties and Characteristics
The chemical composition, regular molecular structure and
high degree of crystallinity result in a unique combination of
outstanding characteristics of Delrin® acetal resins not found in
metals or most other plastics:
• High mechanical strength and rigidity
• Toughness and high resistance to repeated impacts
• Long-term fatigue endurance
• Excellent resistant to moisture, gasoline, solvents, and many
other chemicals of neutral pH
• Excellent dimensional stability
• Good resilience and resistance to creep
• Natural lubricity
• Wide end-use temperature range
• Good electrical insulating characteristics
Compositions
General purpose grades of Delrin® are available in several basic
melt flow series: 100, 300, 500, and 900. These differ primarily
in melt viscosity with 100 being the most viscous and 900
being the most fluid. The most appropriate grade for a given
application will depend largely upon fill requirements and enduse
properties.
A wide range of grades of Delrin® acetal resin are available to
meet specific customer needs for demanding applications:
• Unreinforced resins
• Toughened and super tough resins
• UV-stabilized grades
• Low friction and low wear grades
• Glass-filled and glass-reinforced grades
• Low emission grades
• Extrusion grades
A complete listing of general purpose Delrin® and Delrin®
specialty products can be found in Table 1.
Processing
The most commonly used method for processing Delrin® is
injection molding. The surface finish of correctly molded parts
of Delrin® replicate the surface finish and shape of the mold.
Standard extrusion equipment can be used to extrude the resin
into rods, slabs, sheeting, and small diameter tubing. Parts or
stock shapes can be machined or stamped.
Consult the Delrin® Molding Guide for detailed recommendations
on optimum molding.
DuPont™ Delrin® acetal resin
i
DuPont™ Delrin® Product Offering
Delrin® 100P BK602
Delrin® 100P NC010
Delrin® 111P BK402
Delrin® 111P NC010
Delrin® II 100 NC010
Delrin® 311DP BK402
Delrin® 311DP NC010
Delrin® 500P BK602
Delrin® 500P NC010
Delrin® 511P BK402
Delrin® 511P NC010
Delrin® 900P BK602
Delrin® 900P NC010
Delrin® 150 NC010
Delrin® 100ST BK602
Delrin® 100ST NC010
Delrin® 100T BK602
Delrin® 100T NC010
Delrin® 500T BK602
Delrin® 500T NC010
Delrin® 127UV BK701
Delrin® 127UV NC010
Delrin® 327UV NC010
Delrin® 527UV BK701
Delrin® 527UV NC010
Delrin® 100AL NC010
Delrin® 100KM BK402
Delrin® 100KM NC000
Delrin® 100TL NC010
Delrin® 500AF
Delrin® 500AL NC010
Delrin® 500CL BK601
Delrin® 500CL NC010
Delrin® 500MP NC010
Delrin® 500TL NC010
Delrin® 520MP NC010
Delrin® 911AL NC010
Delrin® 500SC NC010
Delrin® 570 NC000
Delrin® 510GR NC000
Delrin® 525GR NC000
Delrin® 100PE NC010
Delrin® 500PE NC010
High viscosity acetal homopolymer, best combination of stiffness and toughness.
High viscosity acetal homopolymer, with enhanced crystallization.
High viscosity acetal homopolymer, excellent creep and fatigue resistance.
Medium-high viscosity acetal homopolymer, enhanced crystallization and dimensional
stability.
Medium viscosity acetal homopolymer, balance of impact and flow properties.
Medium viscosity acetal homopolymer, enhanced crystallization.
Low viscosity acetal homopolymer, high flow.
High viscosity acetal homopolymer for extrusion.
Super Tough, high viscosity acetal homopolymer, highest impact strength.
Toughened, high viscosity acetal homopolymer, high impact strength.
Toughened, medium viscosity acetal homopolymer, high impact strength.
UV Stabilized acetal homopolymer, high viscosity.
UV Stabilized acetal homopolymer, medium-high viscosity.
UV Stabilized acetal homopolymer, medium viscosity.
High viscosity acetal homopolymer with advanced lubricants for low wear & friction.
Acetal homopolymer with Kevlar® Aramid Resin for with outstanding abrasion resistance.
High viscosity acetal homopolymer with 1.5% PTFE Micropowder.
20% Teflon® PTFE Fiber in Acetal Homopolymer.
Medium viscosity acetal homopolymer, with Advanced Lubricants for low wear & friction.
Medium viscosity acetal homopolymer, chemically lubricated.
Medium viscosity acetal homopolymer with Teflon® PTFE Micropowder and additional lubricant.
1.5% Teflon® PTFE Micropowder in acetal homopolymer.
20% Teflon® PTFE Micropowder in acetal homopolymer.
Low viscosity acetal homopolymer, with Advanced Lubricants for low wear & friction and
dimensionally stable parts.
Silicone Concentrate.
20% Glass Fiber filled acetal homopolymer.
10% Glass Reinforced acetal homopolymer, high strength and stiffness.
25% Glass Reinforced acetal homopolymer, very high strength and stiffness.
High viscosity acetal homopolymer with low emissions.
Medium viscosity acetal homopolymer with low emissions.
Unreinforced,
General Purpose
Extrusion Resins
Toughened Resins
UV Resistant /
Weatherable Resins
Low Wear and
Friction Resins
Glass Filled /
Reinforced Resins
Low Emissions Resins
Delrin® Product Guide Table
Property Method Units
Delrin® 100P
BK602
Delrin® 100P
NC010
Delrin® 111P
BK402
Delrin® 111P
NC010
Resin Identification ISO 1043 POM POM POM POM
Part Marking Code ISO 11469 >POM< >POM< >POM< >POM<
MPa 71 70 72 72
kpsi 10.3 10.2 10.4 10.4
Yield Strain ISO 527 % 22 25 20 20
MPa
kpsi
50
50mm/min 50 65 45
Nominal Strain at
Break ISO 527 % 35 45 30 35
MPa 3000 2900 3200 3200
kpsi 435 420 465 464
MPa 2700 3000
kpsi 392 435
MPa 1500 1700
kpsi 218 247
MPa 2800 2600 2900 2900
kpsi 405 377 420 420
MPa 74 80
kpsi 10.7 11.6
-30°C (-22°F) 10 11 8 9
23°C (73°F) 11 14 9 11
-30°C (-22°F) 350 270
23°C (73°F) 300 NB 190 300
C 165 160 166 165
F 330 320 330 329
C 93 93 100 100
F 200 200 212 212
C 178 178 178 178
F 352 352 352 352
E-4/C 1.0 1.1 0.94
E-4/F 0.56 0.61 0.52
E-4/C 1.1 1.1 1.0
E-4/F 0.61 0.61 0.56
E-4/C 1.5 1.5 1.3
E-4/F 0.83 0.84 0.72
E-4/C 1.0 1.0 0.94
E-4/F 0.56 0.56 0.52
E-4/C 1.1 1.1 1.1
E-4/F 0.61 0.61 0.61
E-4/C 1.5 1.5 1.4
E-4/F 0.83 0.82 0.78
C 160 160
F 320 320
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min 2.5 2.5 2.4 2.4
Surface Resistivity IEC 60093 ohm >1E15
Volume Resistivity IEC 60093 ohm m 1E12
32
V/mil 812
1E2 Hz 3.8
1E6 Hz 3.7
1E2 Hz 200
1E6 Hz 40
CTI IEC 60112 V 600 600
Unreinforced
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
1
Delrin® Product Guide Table
Property Method Units
Delrin® 100P
BK602
Delrin® 100P
NC010
Delrin® 111P
BK402
Delrin® 111P
NC010
Unreinforced
0.75mm HB HB
0.84mm
0.8mm
1.5mm HB HB HB HB
3.0mm HB HB HB HB
0.75mm HB
0.84mm
1.5mm HB HB HB
3.0mm HB
Oxygen Index ISO 4589-1/-2 % 21 17
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm 50 50
0.84mm
0.85mm
0.8mm
1.5mm 110 110 110 110
3.0mm 110 110 110 110
0.75mm 50 50
0.84mm
0.85mm
0.8mm
1.5mm 85 85 85 85
3.0mm 90 90 90 90
0.75mm 50 50
0.84mm
0.85mm
0.8mm
1.5mm 90 90 90 90
3.0mm 95 95 95 95
kg/m3 1420 1420 1420 1420
g/cm3 1.42 1.42 1.42 1.42
Scale M 92 92
Scale R 120 120
Equilibrium 50%RH 0.3
Immersion 24h
Saturation, immersed 1.4 1.0
Normal, 2.0mm 1.8 2.0 1.9
Parallel, 2.0mm 2.1 2.2 2.1
C 210-220 210-220 210-220 210-220
F 410-430 410-430 410-430 410-430
C 215 215 215 215
F 420 420 420 420
C 80-100 80-100 80-100 80-100
F 175-212 175-210 175-212 175-210
C 90 90 90 90
F 195 195 195 195
h 2-4 2-4 2-4 2-4
C 80 80 80 80
F 175 175 175 175
% <0.2 <0.2 <0.2 <0.2
MPa 90-110 90-110 90-110 90-110
kpsi 13-15 13-16 13-16 13-16
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
2
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® II 100
NC010
Delrin® 311DP
BK402
Delrin® 311DP
NC010
Delrin® 500P
BK602
Delrin® 500P
NC010
POM POM POM POM POM
>POM< >POM< >POM< >POM< >POM<
71 74 73 71 70
10.2 10.7 10.6 10.3 10.1
25 15 16 14 17
63 35
35 40
41 25 35 25 30
3100 3300 3300 3100 3100
450 480 480 450 450
2800
406
1600
232
2800 3100 3000 2900
406 450 435 420
86 80
12.5 11.6
12 8 9 7 8
15 8 10 8 9
250 220
NB 300 180 300
165 165 162 158
330 330 324 316
98 103 103 96 94
210 217 217 205 201
178 178 178 178 178
352 352 352 352 352
1.0 0.96 0.94 1.0
0.56 0.53 0.52 0.56
1.0 1.1 1.1 1.1
0.56 0.61 0.61 0.61
1.46 1.30 1.47 1.5
0.81 0.72 0.82 0.82
0.98 0.95 0.98 1.0
0.54 0.53 0.54 0.56
1.1 1.1 1.15 1.1
0.61 0.61 0.64 0.61
1.53 1.4 1.67 1.6
0.85 0.78 0.93 0.9
157
315
2.3 7 7 15 15
>1E15 1E15
1E13 1E12
33
838
3.9
3.8 3.9
200
60
600 600
Unreinforced
3
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® II 100
NC010
Delrin® 311DP
BK402
Delrin® 311DP
NC010
Delrin® 500P
BK602
Delrin® 500P
NC010
Unreinforced
HB HB HB HB
HB
HB HB HB
HB HB HB
HB HB HB
HB
HB
22
200 200
8 8
11 11
15 15
50 50 50 50
50
110 110 110 110 110
110 110 110
50 50 50 50
50
85 85 85 85 85
90 90 90 90 90
50 50 50 50
50
90 90 90 90 90
95 95 95 95 95
1420 1420 1420 1420 1420
1.42 1.42 1.42 1.42 1.42
92
120
0.1 0.3
0.6
0.4 1.4
2.0 1.8 1.9
1.9 1.9 2.0
210-220 210-220 210-220 210-220 210-220
410-430 410-430 410-430 410-430 410-430
215 215 215 215 215
420 420 420 420 420
80-100 80-100 80-100 80-100 80-100
175-210 175-212 175-210 175-210 175-210
90 90 90 90 90
195 195 195 195 195
2-4 2-4 2-4 2-4 2-4
80 80 80 80 80
175 175 175 175 175
<0.2 <0.2 <0.2 <0.2 <0.2
90-110 80-100 80-100 80-100 80-100
13-16 12-15 12-15 12-15 12-15
4
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® 511P
BK402
Delrin® 511P
NC010
Delrin® 900P
BK602
Delrin® 900P
NC010
POM POM POM POM
>POM< >POM< >POM< >POM<
73 73 70 71
10.6 10.6 10.2 10.3
12 12 12 13
35 22
27 28
20 25 17 23
3400 3400 3300 3300
495 490 479 479
3000 2800
435 406
1700 1500
247 218
3100 3100 3000 3000
450 450 435 435
90
13.1
6 7 6 7
7 8 7 8
170 220 200
170 260 130 200
165 165 161 162
329 329 322 324
105 107 98 94
221 225 210 201
178 178 178 178
352 352 352 352
0.90 0.96 0.90
0.50 0.53 0.50
1.0 1.2 1.0 1.2
0.56 0.67 0.56 0.67
1.3 1.30 1.3
0.72 0.72 0.72
0.9 0.96 0.9
0.5 0.53 0.5
1.0 1.2 1.0 1.2
0.56 0.67 0.56 0.67
1.4 1.47 1.3
0.78 0.82 0.72
160 160
320 320
14 15 25 25
>1E15 >1E15
1E12 1E12
32
812
3.5 3.8
3.8 3.8
180
60 50
600 600
Unreinforced
5
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® 511P
BK402
Delrin® 511P
NC010
Delrin® 900P
BK602
Delrin® 900P
NC010
Unreinforced
HB HB HB HB
HB HB
HB HB
HB HB HB
HB
HB
21 22 23
200
8
13
22
50 50 50 50
110 110 110 110
110 110
50 50 50 50
85 85 85 85
90 90 90 90
50 50 50 50
90 90 90 90
95 95 95 95
1420 1420 1420 1420
1.42 1.42 1.42 1.42
92 92
120 120
0.2 0.2 0.26
0.56
1.0 0.9 1.40
1.7 1.7 1.7 1.9
1.7 1.8 1.8 1.9
210-220 210-220 210-220 210-220
410-430 410-430 410-430 410-430
215 215 215 215
420 420 420 420
80-100 80-100 80-100 80-100
175-212 175-210 175-210 175-210
90 90 90 90
195 195 195 195
2-4 2-4 2-4 2-4
80 80 80 80
175 175 175 175
<0.2 <0.2 <0.2 <0.2
80-100 80-100 80-100 80-100
12-15 12-15 12-15 12-15
6
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® 100ST BK602 Delrin® 100ST NC010 Delrin® 100T BK602
POM-I POM-HI POM-I
>POM-I< >POM-HI< >POM-I<
40 41 54
5.8 5.9 7.8
30 30 27
>100 >100 >50
>50 >50 >50
1200 1400 1900
175 203 275
1350
196
550
80
1100 1100
160 160
34
4.9
14 20 11
80 90 23
NB
NB
102 100
215 212
65 60 71
150 140 160
178 178 178
352 352 352
1.2 1.2
0.66 0.67
1.2 1.3
0.67 0.72
1.2 1.3
0.66 0.72
1.2 1.2
0.67 0.67
1.2 1.4
0.67 0.78
1.3 1.59
0.72 0.88
116
241
2.1 2.0 2.0
1E14
1E12
39
990
4.4
3.8
65
600
Toughened
7
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® 100ST BK602 Delrin® 100ST NC010 Delrin® 100T BK602
Toughened
HB HB
HB HB
21
105 105
105 105
85 85
85 85
85 85
85 85
1330 1340 1370
1.33 1.34 1.37
58
105
0.35
0.9
1.4 1.4
1.3 1.3
200-210 200-210 200-210
390-410 390-410 390-410
205 205 205
400 400 400
40-60 40-60 40-60
100-140 100-140 100-140
50 50 50
122 122 122
2-4 2-4 2-4
80 80 80
175 175 175
<0.05 <0.05 <0.05
60-80 60-80 60-80
9-12 9-12 9-12
8
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® 100T NC010 Delrin® 500T BK602 Delrin® 500T NC010
POM-I POM-I POM-I
>POM-I< >POM-I< >POM-I<
52 54 54
7.5 7.8 7.8
25 17 20
>50 45 >50
>50 28 35
1900 2200 2300
276 319 334
2300
334
1150
167
1700 2000 2100
245 290 305
60 60
8.7 8.7
13 7 9
25 13 14
NB 330
NB NB
130 146 146
265 295 295
72 76 78
160 169 172
178 178 178
352 352 352
1.1
0.61
1.2 1.3
0.67 0.72
1.3
0.72
1.1
0.61
1.2
0.67
1.6
0.89
139
282
2.0 12 12
1E15
>1E13
3.6
3.1 3.6
90 160
600 600
Toughened
9
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® 100T NC010 Delrin® 500T BK602 Delrin® 500T NC010
Toughened
HB HB
HB
HB
HB HB
HB
23
200 200
8 8
11 11
15 15
105 105
100
100
85 85
85
85
85 85
85
85
1370 1390 1380
1.37 1.39 1.38
59 79
113 117
0.3 0.21
0.9 0.82
1.9 1.5 1.6
2.1 1.5 1.7
200-210 200-210 200-210
390-410 390-410 390-410
205 205 205
400 400 400
40-60 40-60 40-60
100-140 100-140 100-140
50 50 50
122 122 122
2-4 2-4 2-4
80 80 80
175 175 175
<0.05 <0.05 <0.05
60-80 60-80 60-80
9-12 9-12 9-12
10
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® 127UV
BK701
Delrin® 127UV
NC010
Delrin® 327UV
NC010
Delrin® 527UV
BK701
Delrin® 527UV
NC010
POM POM POM POM POM
>POM< >POM< >POM< >POM< >POM<
71.5 70 73 71 70
10.4 10.1 11 10.3 10.2
22 23 15 14 17
65 50 35 40
37 45 35 23 30
3000 2900 3200 3200 3100
435 420 465 464 450
2800 2700 3000 3000 3000
406 390 435 435 435
10 11 8.5 7 8
13 15 9.5 9 9
350 290 260
400 300 260
162 160 165 163 160
325 320 329 325 320
92 90 95 92 93
198 195 203 198 200
178 178 178 178 178
352 352 352 352 352
1.0 1.0 0.90 0.94 0.95
0.56 0.56 0.53 0.52 0.53
1.1 1.2 1.1 1.1 1.1
0.61 0.67 0.61 0.61 0.61
1.5 1.6 1.5 1.4 1.7
0.83 0.88 0.81 0.78 0.92
1.0 1.0 1.0 0.97 0.94
0.56 0.55 0.53 0.54 0.52
1.1 1.1 1.1 1.1 1.2
0.61 0.61 0.61 0.61 0.67
1.6 1.7 1.6 1.6 1.8
0.89 0.93 0.88 0.89 1.00
160 160
320 320
2.5 2.4 7 15 15
1E11 1E11
32 32
812 812
3.5 3.5
3.4 3.8
180 180
60 60
600 600
UV Stabilized
11
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® 127UV
BK701
Delrin® 127UV
NC010
Delrin® 327UV
NC010
Delrin® 527UV
BK701
Delrin® 527UV
NC010
UV Stabilized
HB HB HB
HB HB
20 22
50 50
50
50 50
50
50 50
50
1420 1420 1420 1410 1420
1.42 1.42 1.42 1.41 1.42
92 92
120 120
0.3 0.21 0.17
0.5 0.37 0.5
1.2 1.2
1.9 1.8 1.9
2.1 1.9 2.0
210-220 210-220 210-220 210-220 210-220
410-428 410-430 410-425 410-430 410-430
215 215 215 215 215
420 420 420 420 420
80-100 80-100 80-100 80-100 80-100
175-212 175-210 175-210 175-210 175-210
90 90 90 90 90
194 195 195 195 195
2-4 2-4 2-4 2-4 2-4
80 80 80 80 80
175 175 175 175 175
<0.2 <0.2 <0.2 <0.2 <0.2
90-110 90-110 80-100 80-100 80-100
13-16 13-16 12-15 12-15 12-15
12
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® 510GR NC000 Delrin® 525GR NC000 Delrin® 570 NC000
POM-GF10 POM-GF25 POM-GF20
>POM-GF10< >POM-GF25< >POM-GF20<
95 145 55
14 20.3 8.0
4.3 3 12
5500 9400 5000
800 1360 725
4800 8500 4600
700 1230 667
5 8 3
5 8 4
50 50 50
50 50 54
174 176 163
345 349 325
164 172 124
327 342 255
178 178 178
352 352 352
0.37
0.20
0.7 0.35
0.39 0.19
0.14
0.08
0.86
0.48
1.0 1.0
0.56 0.56
1.5
0.08
>1E15
1E11 1E12 1E13
3.7 3.7 3.9
3.9 3.8 3.9
70 50
600
Glass Filled / Reinforced
13
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® 510GR NC000 Delrin® 525GR NC000 Delrin® 570 NC000
Glass Filled / Reinforced
HB HB
HB
HB HB
HB
21
150
89
11
50 50
105
105
50 50
85
85
50 50
90
90
1490 1600 1560
1.49 1.60 1.56
0.16 0.17 0.1
1.1 1.26 0.8
1.4 1.2 1.6
1.0 0.4 1.2
210-220 210-220 210-220
410-430 410-430 410-430
215 215 215
420 420 420
80-100 80-100 80-100
175-210 175-210 175-210
90 90 90
195 195 195
2-4 2-4 2-4
80 80 80
175 175 175
<0.1 <0.1
80-100 80-100 80-100
12-15 12-15 12-15
14
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® 100AL
NC010
Delrin® 100KM
BK402
Delrin® 100KM
NC000
Delrin® 100TL
NC010
POM-S POM-RG POM-RG POM-SD
>POM-S< >POM-RG< >POM-RG< >POM-SD<
70 71
10 10.3
18 25
65 65
9.4 9.4
15 15
65
45 33
3000 3200 3200 3000
435 465 465 435
2800 3000 2800
405 435 405
7 4 3.5
9 5 4.5 9
170 60
250 50 150
163 160 158
325 320 315
97 96 98 95
205 205 210 205
178 178 178 178
352 352 352 352
1.0 0.94 1.0
0.56 0.52 0.57
1.1 1.1 1.1
0.61 0.61 0.61
1.5 1.4 1.5
0.83 0.78 0.84
1.0 0.92 1.0
0.56 0.51 0.56
1.1 1.0 1.1
0.61 0.56 0.61
1.5 1.4 1.6
0.83 0.78 0.88
2.5 2.2
Low Wear / Low Friction
15
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® 100AL
NC010
Delrin® 100KM
BK402
Delrin® 100KM
NC000
Delrin® 100TL
NC010
Low Wear / Low Friction
HB
HB
HB
HB
HB
HB
50
50
50
50
50
50
50
50
50
1400 1410 1410 1430
1.40 1.41 1.41 1.43
1.8 1.5 1.7
2.0 1.8 1.8
210-220 210-220 210-220 210-220
410-430 410-430 410-430 410-430
215 215 215 215
420 420 420 420
80-100 80-100 80-100 80-100
175-210 175-210 175-210 175-210
90 90 90 90
195 195 195 195
2-4 2-4 2-4 2-4
80 80 80 80
175 175 175 175
<0.2 <0.2 <0.2 <0.2
90-110 80-100 80-100 90-110
13-16 12-15 12-15 13-16
16
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® 500AF Delrin® 500AL
NC010
Delrin® 500CL
BK601
Delrin® 500CL
NC010
POM-SF20 POM-S POM POM
>POM-SF20< >POM-S< >POM< >POM<
65 67 67
9.4 9.7 9.7
11 13 15
50
7.3
10
35 23 45
23 18 25
2800 3000 3200 3100
405 435 465 450
2500 2800 2900 2900
360 406 420 420
3 6 8 8
3 7 9 9
35 140 290
40 170 350
160 164 160 158
320 164 320 315
92 97 90 90
195 97 195 194
178 178 178 178
352 352 352 352
0.90 1.0 0.92
0.50 0.56 0.51
1.1 1.2 1.1
0.61 0.67 0.61
1.4 1.5 1.6
0.78 0.83 0.89
0.9 1.0 1.0
0.50 0.56 0.56
1.0 1.2 1.1
0.56 0.67 0.61
1.3 1.7 1.7
0.72 0.94 0.94
159
318
14 15 15
>1E15 >1E15
3.1 3.5
90 60
600 600 600
Low Wear / Low Friction
17
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® 500AF Delrin® 500AL
NC010
Delrin® 500CL
BK601
Delrin® 500CL
NC010
Low Wear / Low Friction
HB HB HB
HB HB HB HB
HB HB HB HB
23 22
50 50 50
105 110 100 100
105 110 100 100
50 50 50
85 85 80 80
85 90 80 80
50 50 50
90 90 85 85
90 95 85 85
1530 1380 1410
1.53 1.38 1.41
92
120
0.2 0.25
0.35
1.0 1
1.4 1.7 1.8
2.0 1.8 1.9
210-220 210-220 210-220 210-220
410-430 410-430 410-430 410-430
215 215 215 215
420 420 420 420
80-100 80-100 80-100 80-100
175-210 175-210 175-210 175-210
90 90 90 90
195 195 195 195
2-4 2-4 2-4 2-4
80 80 80 80
175 175 175 175
<0.2 <0.1 <0.2 <0.2
80-100 80-100 80-100 80-100
12-15 12-15 12-15 12-15
18
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Delrin® 500MP
NC010
Delrin® 500TL
NC010
Delrin® 520MP
NC010
Delrin® 911AL
NC010
POM-SD POM-SD POM-SD20 POM-S
>POM-SD< >POM-SD< >POM-SD20< >POM-S<
70 71 53 70
10.2 10.3 7.7 10.1
12 13 13 9
20 28
17 20 15 22
3300 3300 2800 3300
480 479 406 480
3200 3100 2700 3200
460 450 390 460
5 5 4 4
5 6 4 5
120 160 130
125 170 70 150
162 158 160 162
325 315 320 324
100 100 94 103
212 210 201 215
178 178 178 178
352 352 352 352
0.90 0.90 0.90 0.90
0.50 0.50 0.50 0.50
1.0 1.0 0.99 1.0
0.61 0.56 0.55 0.56
1.3 1.4 1.4 1.3
0.7 0.8 0.78 0.72
0.9 0.9 0.9 0.9
0.5 0.5 0.50 0.50
1.0 1.0 0.97 1.0
0.56 0.56 0.54 0.56
1.3 1.5 1.2 1.4
0.7 0.8 0.67 0.78
13 14 25
1E12
3.6
3.6
600
Low Wear / Low Friction
19
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Delrin® 500MP
NC010
Delrin® 500TL
NC010
Delrin® 520MP
NC010
Delrin® 911AL
NC010
Low Wear / Low Friction
HB
HB HB HB HB
HB HB HB HB
HB
HB
18
50
50 105 105 110
50 105 105 110
50
50 85 85 85
50 85 85 90
50
50 90 90 90
50 90 90 95
1440 1410 1540 1400
1.44 1.41 1.54 1.4
0.17
0.33
0.9
1.6 1.7 1.5 1.6
1.9 1.8 1.9 1.6
210-220 210-220 210-220 200-215
410-430 410-430 410-430 390-420
215 215 215 215
420 420 420 420
80-100 80-100 80-100 60-100
175-210 175-210 175-210 140-210
90 90 90 90
194 195 195 195
2-4 2-4 2-4 2-4
80 80 80 80
176 175 175 175
<0.2 <0.2 <0.2 <0.2
80-100 80-100 80-100 80-100
12-15 12-15 12-15 12-15
20
Delrin® Product Guide Table
Property Method Units
Resin Identification ISO 1043
Part Marking Code ISO 11469
MPa
kpsi
Yield Strain ISO 527 %
MPa
kpsi
50mm/min
Nominal Strain at
Break ISO 527 %
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
MPa
kpsi
-30°C (-22°F)
23°C (73°F)
-30°C (-22°F)
23°C (73°F)
CFCFCF
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
E-4/C
E-4/F
CF
Rheological
Melt Mass-Flow
Rate 190°C, 2.16kg ISO 1133 g/10 min
Surface Resistivity IEC 60093 ohm
Volume Resistivity IEC 60093 ohm m
V/mil
1E2 Hz
1E6 Hz
1E2 Hz
1E6 Hz
CTI IEC 60112 V
kV/mm
IEC 60250 E-4
%
Flexural Modulus
Relative Permittivity
Dissipation Factor
IEC 60250
kJ/m2
kJ/m2
ISO 11359-1/-2
ISO 11359-1/-2
ISO 306
ISO 899
ISO 179/1eA
ISO 179/1eU
ISO 75-1/-2
1000h
Notched Charpy
Impact Strength
10°C/min ISO 11357-1/-3
Vicat Softening
Temperature
CLTE, Parallel
CLTE, Normal
Electric Strength 1.0mm IEC 60243-1
ISO 178
0.45MPa
ISO 178
55 - 100°C (130 - 212°F)
55 - 100°C (130 - 212°F)
-40 - 23°C (-40 - 73°F)
ISO 527
1h
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
1.80MPa
@ 3.5% Strain
Thermal Mechanical
50N
Melting Temperature
Flexural Stress
Unnotched Charpy
Impact Strength
Tensile Modulus
Tensile Creep
Modulus
Deflection
Temperature
23 - 55°C (73 - 130°F)
Electrical
Strain at Break ISO 527
Yield Stress ISO 527
Stress at Break ISO 527
Extrusion
Delrin® 150 NC010 Delrin® 100PE NC010 Delrin® 500PE NC010
POM POM POM
>POM< >POM< >POM<
72 70 70
10.4 10.2 10.1
21 22 17
40 54 25
3100 2900 3000
450 420 435
2900 2600 2900
420 377 420
9 10 7
12 14 9
166
331
97 100 97
207 210 205
178 178 178
352 352 352
1.0
0.56
1.1
0.61
1.4
0.78
0.9
0.5
1.0
0.56
1.5
0.83
2.4 2.3 15
Low Emissions
21
Delrin® Product Guide Table
Property Method Units
Resin Identification 0.75mm ISO 1043
0.84mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
1.5mm
3.0mm
Oxygen Index ISO 4589-1/-2 %
High Amperage Arc
Ignition Resistance 0.75mm UL 746A arcs
0.75mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
0.75mm
0.84mm
0.85mm
0.8mm
1.5mm
3.0mm
kg/m3
g/cm3
Scale M
Scale R
Equilibrium 50%RH
Immersion 24h
Saturation, immersed
Normal, 2.0mm
Parallel, 2.0mm
CFCFCFCF
h
CF
%
MPa
kpsi
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Other Temperature Index
s
Flammability
%
%
Density ISO 1183
ISO 62,
Similar to
UL 746B C
Flammability
Classification
RTI, Electrical UL 746B C
Flammability UL94
Classification
Hot Wire Ignition UL 746A
C
Processing Moisture Content
Hold Pressure Range
RTI, Strength
Water Absorption
RTI, Impact UL 746B
IEC
60695-11-10
Melt Temperature Range
Melt Temperature Optimum
Hardness, Rockwell
Molding Shrinkage
ISO 2039/2
ISO 294-4
Extrusion
Delrin® 150 NC010 Delrin® 100PE NC010 Delrin® 500PE NC010
Low Emissions
HB
HB
HB
HB
50
50
50
50
50
85
1420 1420 1420
1.42 1.42 1.42
0.39
2.0 1.9
1.8 1.8
210-220 200-210 200-210
410-430 390-410 390-410
215 205 205
420 400 400
80-100 80-100 80-100
175-210 175-210 175-210
90 90 90
195 195 195
2-4 2-4 2-4
80 80 80
175 175 175
<0.2 <0.2 <0.2
90-110 90-110 80-100
13-16 13-16 12-15
22
The data listed here fall within the normal range of properties, but they should not be used to establish specification limits nor used alone
as the basis of design. The DuPont Company assumes no obligations or liability for any advice furnished or for any results obtained with
respect to this information. All such advice is given and accepted at the buyer’s risk. The disclosure of information herein is not a license
to operate under, or a recommendation to infringe, any patent of DuPont or others. Since DuPont cannot anticipate all variations in actual
end-use conditions, DuPont makes no warranties and assumes no liability in connection with any use of this information.
CAUTION: This product is not permitted to be sold for use in medical applications involving any implantation in the human body or where
contact with internal body fluids or tissues will equal or exceed 24 hours. For applications involving contact of less than 24 hours, see
“DuPont Medical Caution Statement,” H-50102 or contact your DuPont sales representative.
Copyright © 2006 DuPont. The DuPont Oval Logo, DuPont™, The miracles of science™, Delrin®, Teflon®, and Kevlar® are registered
trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved.
H-76836-1 (11/06) Printed in the U.S.A
Americas
DuPont
BMP26-2363
Lancaster Pike & Route 141
Wilmington, DE 19805 U.S.A.
Telephone +1 302 774 1161
Toll-Free (USA) 800 628 6208
Fax +1 302 999 4399
DuPont Do Brasil, S.A.
Alameda Itapecuru, 506
06454-080 Barueri, SP Brasil
Telephone +55 11 4166 8542
Fax +55 11 4166 8720
Asia Pacific
DuPont China Holding Co, Ltd.
15th Floor, Shui On Plaza
333 Huai Hai Road (Central)
Shanghai 200021, China
Telephone +86 21 6386 6366
Fax +86 21 6386 6333
DuPont K.K./DuPont Asia Pacific
Sanno Park Tower
11-1 Nagatacho 2-chome
Chiyoda-ku, Tokyo, 100-6111
Telephone +81 3 5521 2771
Fax +81 3 5521 2775
Europe / Middle East / Africa
DuPont de Nemours Int’l. S.A.
2, Chemin Du Pavillon
PO Box 50
CH-1218 Le Grand Saconnex
Geneva, Switzerland
Telephone +41 22 717 51 11
Fax +41 22 717 55 00
plastics.dupont.com
For further information please contact
Dial DuPont First at 1-800-441-0575
or via e-mail:
web-inquires.ddf@usa.dupont.com
DuPont™ Delrin® acetal resin
