Model: | LD-MP38B |
---|---|
Brand: | LD |
Origin: | Made In China |
Category: | Industrial Supplies / Industrial Supplies Stocks |
Label: | Production logging , PLT , well logging tools |
Price: |
-
|
Min. Order: | 1 pc |
Live Chat: | Last Online:02 Feb, 2015 |
1.LD-MP38B-YCGWY
LD-MP38B-YCGWY Telemetry Magnetic locating Gamma Well Temperature and Pressure Logging Tool
Outside diameter: |
Φ38mm(1-1/2”) |
Working temperature: |
-40℃-175℃ |
Working pressure: |
≤100Mpa(14500 psi) |
Magnetic Locating Fiducially Value: |
20000HZ |
Magnetic Locating Relative Variability: |
≥10% |
Natural Gamma Background Value: |
≥80CPS |
Gamma Counting Stability: |
≤7% |
Pressure measuring range: |
0-100Mpa |
Pressure measuring resolution: |
0.01 Mpa |
Pressure measuring accuracy: |
±0.1% |
Temperature measuring range: |
-40℃-175℃ |
Temperature measuring resolution: |
0.02℃ |
Telemetry Coding Method: |
Manchester’s Code |
Baud rate: |
5.729kbps |
2.LD-MP38B-06 Radioactive Fluid Density Tool
The instrument takes 137Cs as radioactive source whose photon energy is 0.661MeV. Under this energy value, electron pair effect will not happen in ray-matter interaction. The instrument has the advantage of not affected by down-hole fluid pressure, temperature, viscosity, salinity and so on.
OD: |
Φ38mm(1-1/2″) |
Working temperature: |
-40℃-175℃ |
Working pressure: |
≤100Mpa (14500 psi) |
Density measurement range: |
0-1.5 g/cm3 |
Density measurement resolution: |
0.01 g/cm3 |
Density measurement accuracy: |
±0.02 g/cm3 |
3.LD-MP38B-05 Water Holdup Tool
The sensor of the instrument adopted coaxial cylindrical capacitor structure. Oil and water has different dielectric constant. When the mix fluid is located on the sampling section, the capacity of sensor will change according to different oil-water volume ratio. So that water holdup ratio of down-hole fluid can be detected. The instrument is consecutive water holdup measurement instrument which can measure both at set point and consecutively. Capacity water holdup instrument is the main method for measuring production fluid water holdup ratio at present.
Outside diameter: |
Φ38mm(1-1/2″) |
Working temperature: |
-40℃~175℃ |
Working pressure: |
≤100Mpa (14500 psi) |
Water holdup measurement range: |
0%~95%(volume ratio) |
Water holdup measurement resolution: |
1%(volume ratio) |
Water holdup measurement accuracy: |
5%(volume ratio) |