Home > Products > Packaging , Printing & Paper > Printing Materials

UV CTCP POSITIVE PLATE (UV CTPP) TDS

UV CTPP is researched and developed innovatively by Anhui Phoenix Plate Technology Co., Ltd to meet the  UV CTPP technical progress. The plate not only can meet the demand of UV CTP plate making but also be applied to traditional and manual plate making technic. Excellent component combination and producing technic make the plate to be provided with high-sensitive, strong compatible, stable quality and so on characteristics.

Special high grade Aluminium
Using high grade Aluminium as the backstop to keep the even surface, exact dimension and all kinds of physics and mechanical capabilities.

Compound halftone frame, close-grained oxidation layer
Making  halftone frame on the substrate by a series of mechanically abrading and electrochemistry techniques to form multilayer Compound halftone frame and close-grained oxidation layer on the surface to ensure the plate to keep exact dot-reproduction and excellent endurance.

Hydrophile management to substrate
UV-CTPP ps plate adopt Hydrophile managed substrate to not only ensure the firm combination between sensitive layer and substrate but also improve the balance between water and ink so that it prevent from scum when machine idle and during printing.

Excellent coat component
UV CTPP ps plate adopt excellent coat component to make the plate keep well-proportioned coating apparent, high sensitive speed, fine dot-reproduction, wide plate making operation latitude and 30,000  to 50,000 pressrun. The plate is very suitable to UV CTPP plate making for its high sensitive speed and excellent dot-reproduction so that it is very fit for commercial top grade color printing and newspaper printing.
Flocking coating: (light ) green; after exposure: light blue.

Making small grain on the surface
When used as UV CTPP plate, no flock coating; when used as traditional positive ps plate, using flock coating to shorten the vacuumizing time so that ensure the close touch between film and plate and prevent the dot becomes weak.
Direct to plates or Computer to plates all are ok to use our plates.

Type: Positive UV CTcP plate Note
Spectral sensitivity: 380-405 nm 
Exposure energy: 100-110mj/cm2 
Developing time: 20-30 seconds 
Developing Conditions： Pure Developer: Water =1:4,
Fahrenheit:73.4℉±1.8℉
Centigrade:23℃±1℃ 
Resolution: 2-98% 
Run-length: 30,000-50,000 (Varies with its printing conditions and imaging content )
CTCP Machine MATTCHED BasysPrint；Luscher；Cron；PolyTech 
Energy ≥90mw Make adjustment according to the speed of machine
Drum Speed ≥700rpm Make adjustment according to the energy of machine
  
Safelight:  Yellow light 
 

Store, open, transport
Light, heat can making coating happen chemic change, so store temperature:10-30℃,
relative humidity:≤65﹪
Open under yellow light; s est to plate making without sunlight, except printing down light, all other light should be yellow light.
Lightly take up and down, prevent bump, break, throw, stacking height ≤1.5 meter.

Storage life
Store according to recommended condition, storage life:12 months