KABIR Make Acrylic Rotameters are precision machined from clear acrylic block and fitted with
needle valves stream lined in appearance. They are designed to give maximum
Accuracy visibility & R edness.
FLOATS:
Stainless steel, Teflon, PVC or as per requirement. In bigger models guide rods
are provided for better stability.
METERING VALVE:
For Accurate flow control precision machined needle type valves are
ACCURACY:
Standard Accuracy of 1.5 to 1% at full Scale. Better accuracy on specific
requirement.
FITTINGS:
Top / Bottom or Rear as per requirement in S.S. screwed, Nozzle, with Suitable "0"
Rings to avoid leakage.
CALIBRATION:
Carried out at works individually using air and water at standard condition. Reliable
empirical conversion, are used to calibrate for other fluids.
INSTALLATION:
Rotameter are ideal for direct Panel mounting because of their neat modular
apperance, online is also possible.
TECHNICAL DATA TECHNICAL SPECIFICATION
METERING BODY : ACRYLIC PLASTIC
WETTED PART : SS / BRASSI PVC / TEFLON
FLOAT : SS / TEFLON / PVC / P.P.1/4" NPT / BSP / SCREWED REAR WITH VALVE.
PIPE CONNECTIONS : AND FANGED TOP BOTTOM / REAR
"0" RING : STD : NEOPRENE / TEFLON VITON SILICON
SCALE : ENGRAVED ON THE BODY
PRESS RATION : TO 100 PSIG STD
RATING : 0 PT HIGHER RATING ON SPECIAL APPLICATION
TEMP. : UPTO 70° C
ACCURACY : + .5 TO + 1% AT F.S.
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content. To report fraudulent or illegal content, please click here.
