Home > Products > Electronics & Electricity > Electronic Instrument > Test Bench

 Features

•10,32 or 100 independent channels optional, parameters can be set and save freely for variety of inspection procedures and standards, outdoor applications without test block.
•Square wave pulse generator, amplitude and pulse adjustable, suitable to detect flaw of work pieces of various materials and different depth.
•A-scan and B-scan optional.
•DGS(AVG) curve available for flaw detecting of casting work pieces.
•Peak value inside gate captured automatically.
•Convenient automatic calibration function for normal probe, angle probe.
•Curve surface compensation function detecting the diameter to calibrate flaw position automatically.
•High light electroluminescent, screen viewable in strong light, weak light, as well as sunlight.
•Menu and sub-menu displaying in the same window, user-friendly,simple and convenient to operate.
•Waveform and channel parameters directly saved into U disk, easily to be processed on PC with SUFD2 or SUB100 software.
•Directly connected to printer for report and wave printing.
•Small size and portable easily, low consumption, large Li battery capacity for more than 20 continuous operating hours.
Extra Features and Functions-SUB100
•Thin-Film Transistor Screen-TFT
•Video recording duration up to 3 hours
•A-scan, B-scan and color B-scan
•FFT function build in
•Graphic demonstration of weld  bead weld , crack depth measurement, curved surface correction, echo envelope, echo coding
•interface protection.

Specifications

Scan Range:0~6000mm or 0~9999mm
Velocity range:1000 m/s~9999m/s or 4000~20000m/s
Gain:0dB~110dB
Display Delay:-20μs~+3400μs
Sensor Zero Offset:0μs~99.99μs
Sensor Frequency:0.1~15MHz
Sensor impedance:100Ω,150Ω, 200Ω,500Ω
Repetition Rate: 10~1000Hz
Sensitivity Allowance: ≥60dB(D:200mm ,FBH: 2)
Resolution: ≥40dB
Linear Rejection: 0~80%
Vertical Linearity deviation: ≤3%
Horizontal Linearity deviation: ≤0.2%
Dynamic Range: ≥32dB
Pulse Pattern: square
Pulse Strength:100V——800V
Pulse Width: 50ns——1000ns
Power Supply:12×3.7V(Li-ion Battery)
Operation Temperature: 20°C~50°C
Humidity: 20%~90%RH.

Configuration

Standard Configuration