Model: | HT |
---|---|
Brand: | Hunter-Men |
Origin: | Made In China |
Category: | Chemicals / Adhesives & Sealants |
Label: | PPhot melt adhesive , hot melt adhesive , hot melt film |
Price: |
¥1
/ pc
|
Min. Order: | 1 pc |
Bonding PP and Fabrics
Performence:
Performance |
Unit |
HT |
|
Basic Resin |
— |
Polymer Resin |
|
Film Thickness |
mm |
0.05-0.18±0.01 |
|
Melt Point |
℃
|
100
|
|
Paper Thickness |
mm |
0.05 |
|
Tensile Strength |
MPa |
10.5 | |
Elongation at Break |
% |
560 |
|
180°Peel Strength a |
N/25mm |
≥80 |
|
Resistant Washing b |
— |
good |
|
Note: The basic material are PP and Fabrics, bonding process:160℃,15S,0.6MPa,peel test speed:100mm/min;
Bonding Process:
Firstly,at 120 to 150℃ preheating 3 to 5 seconds and pressure is 0.2-0.6KG/cm²,then the film will bond on one side of basic material;
Secondly,peel the release paper, put the two kind materials on plate backing machine at 140 to 180℃ and pressure is 0.2-0.6MPa spend 5 to 10 seconds, the materials will be stick well,but please note that the basic materials thickness and operate temperature depend on pressure and time,by the way, operate temperature (advice temperature is 150℃)and pressure to ensure the film can full soak the basic materials and without excess glue is better.
Deal with Stickiness
At 100 to 120℃, the glue of materials will soften, and you are able to peel them, then deal with residue glue by acetone,ethyl acetate or others solvent to soaking 1 to 2 minutes.