Model: | MB16 |
---|---|
Brand: | Gaohua |
Origin: | Made In China |
Category: | Electronics & Electricity / Other Electrical & Electronic |
Label: | pressure sensor , mb16 sensor , pressure transmitter |
Price: |
-
|
Min. Order: | 1 pc |
Live Chat: | Last Online:26 Dec, 2013 |
MB16 Piezoresistive Pressure Sensor
Features
Pressure range -100kPa~0kPa~2kPa…60MPa;
High-strength stainless steel housing;
Small,light and high stability;
Various outline structure for choice
Introduction
MB16 Piezoresistive Pressure Sensor adopts high sensitive elements and MEMS technology.
Due to the stainless steel pressure port and housing,MB16 has good media compatibility and anti-corrosion perfomance. Wider temperature compensate range for its stable performance and high
accuracy.It is designed for pressure measurement of vapor,gas and liquid,which is compitable with
316L stainless steel.
Application
Medical equipment
Aviation and navigation inspection
Hydraulic system
Cars
Pumps etc.
Specification
Pressure Type |
Gauge pressure, Absolute pressure,Sealed gauge |
Measuring Medium |
Liquid ,gas,vapor ,which are compatible with SUS304 |
Pressure range(MPa) |
-0.1 1 1.6 6 10 20 40 60 or customized |
Pressure range (bar) |
-1 10 16 60 100 200 400 600 or customized |
Pressure range (psi) |
-14.5 300 700 900 2k 4k 8k or customized |
Overload range |
200%FS |
Bursting pressure |
300%FS |
Power Supply |
10VDC(max.15VDC);1.5mA (max.4 mA) |
Output signal |
millivolt signal output |
Transmitting |
2-wires, 3-wires, |
Bridge resistance |
4000Ω(typ.) |
Vibration |
10~500Hz 25g |
Shock resistance |
50g 11ms |
Accuracy |
±0.5%FS(typ.) @25°C |
Zero temp.drift |
±0.03%FS/°C |
FS temp.drift |
±0.03%FS/°C |
Long-term stability |
±0.2%FS/Y |
Insulation resistance |
250 MΩ/250V, 100MΩ/250V |
Medium temp. |
(-40~125)°C |
Ambient temp. |
(-40~85)°C |
Storage temp. |
(-40~125)°C |
Compensated temp. |
(-10~80)°C |
Housing |
SUS304 |
Diaphragm |
SS316L |
O-ring |
Viton |
Protection |
IP67 |
Electrical Connection
Cable connection wiring
2-wires,4~20mA output
3-wires,0~5V,1~5V output
Order note:
1. It is recommended that the sensor should be installed as Suspended Mode to avoid face tight press and avoid affecting sensor stability.
2. Please pay attention to protect the diaphragm to prevent any damage or bad performance.
3. If the working temperature of Viton rubber exceeds the temperature of the rubber specification or be applied in critical environment, please contact us.
4. The material of measuring medium should be compatible with the stainless steel.If it is corrosive,pls specify its material in detail.
5. All specifications are subject to change.Contact Gaohua for specifications and engineering drawings that are critical to your application.Drawings contained in this document