| Model: | BS12 |
|---|---|
| Brand: | Gaohua Sensor |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Pressure Gauge |
| Label: | piezo sensor , pressure sensor , pressure transmitter |
| Price: |
-
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:26 Dec, 2013 |
BS12 Piezoresistive OEM Pressure Sensor
Feature
Pressure range (-0.1~0…60)MPa;
Gauge, absolute and sealed gauge;
Constant current power supply;
Isolated construction to measure various media
Φ19mm OEM pressure element
316L stainless steel material
Perfect long term stability
Different male thread connection optional
Application
Industrial process control
Level measurement
Gas, liquid pressure measurement
Pressure meter
Pressure calibrator
Liquid pressure system and switch
Refrigeration equipment and air conditioner
Aviation and navigation inspection
Introduction
General BS12 Piezoresistive Pressure Sensor
The outline, installation dimension and sealing method of BS12 is strongly interchangeable, it is widely used for measuring pressure which is compatible with stainless steel and Viton;
Assembled BS12N Piezoresistive Pressure Sensor
Put general BS12 pressure sensor into the housing with standard or special thread; use face type seal or waterline seal; with flexible construction and strict inspecting and screening; the assembled.BS12N sensor has similar application with general type sensor, it can be used for mounting and production of different pressure instruments;
Welded BS12N-H Piezoresistive Pressure Sensor
Put general BS12 pressure sensor into the housing with standard or special thread; and weld sensor with housing together,noring for sealing. The whole product has flexible construction, it has wider application fields than general pressure sensor, can be used for mounting and production of different pressure instruments;
Flush Diaphragm BS12P Piezoresistive Pressure Sensor
Flush diaphragm pressure sensor is a fullwelded pressure sensor, it has pressure port G1/2 male or M20x1.5 male, sealing by Viton Oring at the end of thread. The isolated diaphragm is welded in front of thread port, the whole measurerange is 0~100kPa-35MPa. It can be used for food, medicine,sanitation fields in which the media is easily dirty.
Gauge BS12 Pressure Sensor with Vacuum Measurement
We can use general type, assembled type as well as flash diaphragm type gauge pressure sensor to measure pressure below air pressure, the min. pressure can be around 100kPa.
|
Electric Performance |
||
|
Power supply |
1.5mA(typ.) |
|
|
Electric connection |
Kovar pin or 100mm silicon rubber flexible wires |
|
|
Common mode voltage output |
50% of input (typ.) |
|
|
Input impedance |
2kΩ~6kΩ |
|
|
Output impedance |
2kΩ~6kΩ |
|
|
Insulation resistor |
250MΩ, 250VDC |
|
|
Overpressure |
<6MPa, 2 times FS; (6~60)MPa, 1.5times FS; Differential pressure or Low pressure range 1.3times FS |
|
|
Construction |
||
|
Diaphragm |
stainless steel 316L |
|
|
Housing |
stainless steel 316L |
|
|
Pin |
Kovar |
|
|
O-ring |
Viton |
|
|
Net weight |
~30g(general type) |
|
|
~50g(flush diaphragm) |
||
|
~150g(assembled type) |
||
|
Environment Condition |
||
|
Position |
Deviate 90° from any orientation, zero change ≤0.05%FS |
|
|
Impact |
100g, 11ms |
|
|
Media compatibility |
The gas or liquid which is compatible with construction material and Viton |
|
|
Basic Condition |
||
|
Media temperature |
(25±1)°C |
|
|
Environment temperature |
(25±1)°C |
|
|
Shock |
0.1g (1m/s/s) Max |
|
|
Humidity |
(50%±10%)RH |
|
|
Local air pressure |
(86~106)kPa |
|
|
Power supply |
(1.5±0.0015)mADC |
|
