Model: | RS |
---|---|
Brand: | LEEBOO |
Origin: | Made In China |
Category: | Industrial Supplies / Other Industrial Supplies |
Label: | EXPANSION JOINT |
Price: |
-
|
Min. Order: | 1 pc |
Live Chat: | Last Online:16 Dec, 2013 |
Product specification:
This product provides great convenience for water supply pipeline,water tower,water pump,water meter and valve to install and detach.It also can compensate the expansion or contraction caused by temperature change.
The material of the inner the product includes cast iron(HT),ductile cast iron(QT), Carbon steel(Q235),and stainless steel(304,316).
Loose the gland bolts before installs it, then pull the product to the installation length and fasten it,squash is forbidden.Sometimes,fixed supports on the both side are necessary.
The flange conection adopts the standard of GB/T9115-2000.
Item |
Type |
JGD-1 |
JGD-2 |
JGD-3 |
Working pressure Mpa(kgf/cm2) |
1.0(10) |
1.6(16) |
2.5(25) |
|
Burst pressure MPa(kgf/cm2 ) |
2.0(20) |
3.0(30) |
4.5(45) |
|
Vacuum KPa(mm/Hg) |
53.3(400) |
86.7(650) |
100(750) |
|
Applicable temperature °C |
-15°C~ +115°C under special conditions-30°C ~+250°C |
|||
Applicable media |
Air, compressed air, water ,sea water ,hot water, oil, acid ,alkali etc. |
Technical parameter:
Nominal Diamete(DN) | Length(L) | ||
(min.)L | Installation Length L | (max.) L | |
40 | 140 | 160 | 180 |
50 | 145 | 165 | 185 |
65 | 145 | 165 | 185 |
80 | 160 | 180 | 200 |
100 | 170 | 180 | 210 |
125 | 170 | 190 | 210 |
150 | 175 | 190 | 215 |
200 | 180 | 195 | 220 |
250 | 235 | 200 | 285 |
300 | 250 | 260 | 310 |
350 | 265 | 280 | 335 |
400 | 280 | 300 | 360 |
450 | 295 | 320 | 385 |
500 | 310 | 340 | 410 |
600 | 340 | 360 | 460 |
700 | 370 | 400 | 510 |
800 | 400 | 440 | 540 |
900 | 430 | 470 | 570 |
1000 | 40 | 500 | 600 |
1200 | 475 | 525 | 625 |
1400 | 500 | 550 | 660 |
1600 | 530 | 610 | 690 |
Notes:
1, RS Flexible Sleeve Expansion joint can produce deflection which can be up to 5.85°.
2, The number in the table are ones under the condition that there is no deflection.
3, The expansion joints are sealed by rubber rings and they can’t withstand the axial tension themselves. Generally, they are installed on the Straight Pipeline. If they are installed near bent pipes or T-tubes, buttresses are needed to prevent them from leaking.
4,Single-plate Short Pipes can be substituted by casting iron straight pipes.
5, Flange connection: GB2555-81
6, Table L: Installation Length