Home > Products > Electronics & Electricity > Power Supply & Distribution > Other Power Supply & Distribution

LED tube emergency lighting power

Light source:：applicable for 8-28w LED tub lighting

Battery specification:：12V NiCD and NiMH battery pack

additional service:： provide full sets of power and accessories, including inverter, iron box, battery pack,LED indicator and waterproof joint or connector.

Charging time:：24h

Battery size：12V/2.5AH（12W2hrs）

Output voltage：AC220V

Inverter size：（215×40×30mm)

Battery size：(250x52x25)mm

Weight ：Battery weight:500g，inverter weight:185g

Power pack size:：330×100×45

Features:：

1：Adopts intelligent IC control circuit, emergency power automatically light on when power outage and converted to charging status when electricity power back to work well.

2：The output voltage is 220 v-50Hz,applicable for various circuit of LED tube.The adaptable ability is very strong.

3：Emergency power is 100% rated power, determined by the circuit inside the tubes;

4：High reliability and high efficiency: efficiency is as high as 90% by adopting the flyback inverter and switch power, power is less than 0.5 watts in standby status.

5：Designed power is strong:this system can provide up to 30w  output power when encounter power outage ;

6：The emergency power supply with multiple protection function:       

  Charging protection- transferred to trickle charging condition after charging saturated, It can compensate the battery self-discharge;        

     Discharge protection-  in the process of illumination of emergency lighting ,The battery end of the discharge automatically and lamps goes out when the battery is running out;                                              

     NO-loading, short circuit protection function, etc.

7：According to the actual need to match different capacity of the battery,  The emergency duration can reach 1 to 3 hours.

8：High quality of NiCD rechargeable battery with 4 years of life spam.

9：Emergency conversion is fast.this system can timely transformation output when the power failure or abnormal electric. The conversion time is less than 0.1 seconds,

1O.Small volume, convenient and flexible installation, suitable for all kinds of industrial, civil, building and other places of different application of lamps and lanterns;

11：Passed CE, EMC, ROHS, etc.