Home > Products > Industrial Supplies > Machinery > Boilers

 1.  

LCD Automatic Intelligent Electronic Control System
The boiler operating system is automatically controlled, and all running state can be seen on the LCD screen. You could observe on the display screen the working state of boiler electric heating pipe, boiler water level state, current temperature, circulating pump operating state as well as fault and alarm state etc, making you know the operating condition of the boiler at any time, and use at ease. Users could make any adjustment from ambient temperature to 95 degrees according to needs, and enter automatic operating state once the temperature is set. Four time periods could be set according to actual demand for timing control, and the entire boiler management does not need people to be on duty.

2.  

The Use of High-quality Core Components—Electric Heating Pipe
Electric hearing pipe is not only made of stainless steel pipe with high-quality thick wall of 316L, with life cycle exceeds by 30% than commonly used 304 stainless steel pipe, but also uses imported high-temperature magnesium oxide powder and sealing materials, with high temperature resistance up to 900℃. It could better ensure the service life of electric heating pipe. In addition, electric pipe and furnace body are connected to flange, which is convenient for replacement, repairs and maintenance.

3.  

Use High-quality Components
All pipes and instruments are connected by using stainless pipes or copper pipes, and electrical appliances are the most famous Delixi electric appliances, which are safe and reliable with luxurious configuration.

4.  

Multiple Safety Interlock Protection
The products have venting ports, which could prevent boilers from producing pressure and thus causing explosion; at the same time, it has low water level protection, and the boiler would stop working automatically when water supply stops, preventing boiler from dry heating and leading to phenomenon of damage or even burn out in electrical heating components. Leakage protection makes operating personnel and equipment security more protected, so that boiler would clear the circuit automatically even there is short circuit and leakage because of improper boiler operation, and ensure the safety of operation personnel and control circuit timely.

5.Putting Reasonable Electric Load into Use Could Save Energy and Extend Life Cycle
Electric heating pipe could not only have simple segmented control, not simply have functions of segmented input and segmented output one after another, the most reasonable thing is that it could select the amount to be added into heating pipe automatically according to the degree of pressure. It could check in or out cyclically, which could ensure the stability of used pressure, making the service time of all heating pipes be averaged, and trying to extend its service life to the largest extent.6.  

Extremely Easy to Install and Use
Before leaving factory, products should pass strict deb ing. Users only need to connect the power and water source, and press the start button to enter automatic running state without complicated installation.

7.  

Scientific Design and Attractive Appearance
Use cabinet type scientific design style, the internal designed structure is reasonable, the repairs and maintenance are extremely convenient. The boiler shell uses one time molding process of CNC cutting and CNC folding with fine workmanship; the shell surface is treated by high-temperature spray, thus, it is durable and has an elegant appearance.

8.  

Use Electricity Is More Environmentally Friendly and More Economical
Electricity energy has no pollution, and is relatively more environmentally friendly compared to other fuels. Using off-peak power could save operating cost of equipment greatly, and is the optimal choice for energy saving and environmental protection.

 1.  

The boiler design and manufacturing quality should follow relevant regulations of Hu Zhi Ji Jian Te (2003) attachment 2 -- Acceptance Conditions for Small-scale and Normal Pressure Hot Water Boilers and Provisions on the Safety Supervision over Small-scale and Normal Pressure Hot Water Boilers.

2.  

The heating surface material, covered electrode and welding wire of the boiler should all have quality certificates.

3.  

The steel materials used for the boiler should accord with regulations of GB700 and GB 8163.

4.  The boiler should be welded by the welder who has been trained and qualified through examination.
5.  The boiler should be equipped with automatic protection device.
6.  GB1576-2001 industrial boiler water quality should be reached.