| Model: | JQT |
|---|---|
| Brand: | VICTORY |
| Origin: | Made In China |
| Category: | Construction & Decoration / Shaped Building Material |
| Label: | light wall machine , interior panel , hollow slab making |
| Price: |
US $9500
/ pc
|
| Min. Order: | 1 pc |
| Live Chat: | Last Online:25 Jun, 2014 |
lightweight hollow wall panel with fast delivery
1 What panels can this machine produce
• Materials:
JQT Series Lightweight wall making machine take industrial ash and slag, fly ash, coal gangue, pumice, shale, haydite etc of one or more, add a certain proportion of ordinary cement, expanded perlite as raw material, you can add 1.6-4mm low carbon steel wire in the wall panel as support strengthened material.
• JQT Lightweight wall panel making machine technical parameters:
|
Modle |
JQT9x60 |
JQT12x60 |
JQT18x60 |
|
|
Width(mm) |
595±2 |
595±2 |
595±2 |
|
|
Thickness(mm) |
90±1 |
120±1 |
180±1 |
|
|
No. of holes and hole diameter(mm) |
7x58 |
5x85 |
3x132 |
|
|
Panel making speed(m/min) |
1.1-1.7 |
1.1-1.7 |
1.1-1.7 |
|
|
Main motor (kw) |
Y112M-4 |
Y112M-4 |
Y132S-4 |
|
|
Vibrator(kw) |
ZW5A-0.8 |
ZW5A-0.8 |
ZW 10B-1.1 |
|
|
Overall dimensions (mm) |
2560x950x980 |
2560x950x980 |
2560x950x980 |
|
|
GW(kg) |
1100 |
1300 |
1800 |
|
We can design and produce different machine according to your requirement.
• The Advantage of Lightweight wall
• The questions you should know (what is your requirement?):
2 The feature of this machine
• The principle of this machine:
There is a series of spiral blades in the molding cavity formed by the the extruder's side walls,vivration plate ,scraping plate and the pedestal,the blades rotate as the required direction,continuously push the dry and hard concrete which is mixed evenly,compounded suitably under the vivration plate and scraping plate ,plus the constantly vibrating by the vibrator,it will make the powder concrete compressed to tight,the slurry in the material will be extracted at the same time,so the original panel is formed in the molding cavity,the original panel will generate the reverse thrust to the spiral blades in a state that almost can't be compressed,when the reverse thrust is greater than the friction generated between the molding cavity and the original panel,the entire machine will be pushed forward.The final panel will be formed when the original panel troweled through the side walls and the scraping plate.
• About the easily-worn parts:
Spiral reamer, edge template, vibration plates, hang hooks, guiding reinforced mixture device etc easily-worn are surrounded by hard alloy welding, enhance easily-worn parts service life extremely.
3 The production site and supporting machine:
• The production site:
Production site use trams (channel steel orientation) or trackless (Ground sizzling orientation) ,the user can place order according to required
• The supporting machine:(we have full set of production line to meet your requirements.)
1 set lightweight wall panel making machine
1 set steel bar tension machine,
1 set board cutting machine,
1 set dumper
1 set concrete mixer
1 set hammer crusher
4 Quality and service commitment.
a. We can provide high grade quality products at factory price and put the
customers’ interest in the first place
b. We can timely provide the complete sets of equipment and accessories
c. Our products enjoy good reputation in the global market and you can rest
assured the cooperation with us
d. In the warranty period ,the damage or failure all because of the quality of products
can be free repaired.
e. We can guarantee the fast shipment and best service if you place the order
