Model: | LS/LSY |
---|---|
Brand: | PK |
Origin: | Made In China |
Category: | Industrial Supplies / Mining Machine |
Label: | screw conveyor , spiral conveyor , screw feeder |
Price: |
US $2500
/ pc
|
Min. Order: | 1 pc |
Last Online:11 Dec, 2013 |
Calcium Powder/Cement Screw Conveyor for Silo is designed to transport bulk materials from one place to another. It can transfer powdery or granular materials in both horizontally and on an inclination. It is widely used in chemical, coal mine, grain, metallurgy industries. Material temperature must be lower than 200°C, with conveyor installation angle may reach up to 60°C.
When the hollow axes with screw flight rotates along the jacketed trough, the bulk material feed into the trough and screw flight was hold back by the frication resistance acted on the wall of trough during running, the screw flight push the material and make the material do axial movement, simultaneity the material contact with the hollow shaft and jacketed trough full with cooling water and do heat transfer process. The cooled material can be discharged at the proper outlet at the bottom of trough or transport out at the end of trough.
Model |
LSY 100 |
LSY 120 |
LSY 140 |
LSY 160 |
LSY 200 |
LSY 250 |
LSY 300 |
LSY 400 |
||
Screw Diameter (mm) |
90 |
115 |
135 |
163 |
185 |
237 |
285 |
362 |
||
Rotation Speed (r/min) |
300 |
300 |
300 |
308 |
260 |
200 |
170 |
170 |
||
Housing Diameter (mm) |
108 |
133 |
159 |
194 |
219 |
273 |
325 |
402 |
||
Max. Capacity (t/h) |
7 |
10 |
15 |
25 |
40 |
60 |
90 |
120 |
||
Max. Length (m) |
8 |
10 |
12 |
15 |
18 |
25 |
25 |
25 |
||
Operating Angle (°) |
0°~60° |
|||||||||
Power (kw) |
L≤7m |
1.1 |
2.2 |
3 |
5.5 |
7.5 |
11 |
18.5 |
18.5 |
|
L>7m |
2.2 |
3 |
4 |
7.5 |
11 |
15 |
22 |
22 |
Note: When you inquiry to us ,please provide the following information , our engineer will help you select the most suitable Calcium Powder /Cement Screw Conveyor for Silo according to your specific requirements. Thank you for your cooperation.
1. What is the conveying material and its physical characteristics? (such as bulk density, feeding size, temperature, mositure content etc.)
Material name:_______
Physical characteristics
Bulk density:___t/m³
Feeding size:____mm
Working temperature:____degree
Moisture:____
2. What is the processing capacity you are going to achieve?
Processing capacity:____(t/h or m³/h)
3. What is the inclination angle of the conveyor?
Inclination angle:__________degree
4. What is the conveying length?(the distance between the inlet and outlet)
Conveying length:_______m
1.Totally-enclosed structure without causing any environmental pollution.
2.Construction available in mild steel and stainless steel.
3.Easy assembly and replacement of component parts.
4.Easy maintenance and low operating cost.
5.Multiple inlets and outlets